A
FULL MOTION FLAT PANEL TV MOUNT FOR 28-65" TELEVISIONS
User's Guide for Model TM65 v1568-01
B
WARNINGS
C
• THE TV MOUNT MUST BE FIRMLY ATTACHED TO A SOLID CONCRETE/
BRICK/WOOD WALL, OR WALL STUDS BEHIND DRYWALL.
D
• Tighten screws so that parts are firmly attached, but do not overtighten.
Overtightening may cause unintended damage or weakening of parts.
• Do not remove or loosen any screws until they are no longer engaged
E
with the mount. Doing so may cause the TV to fall.
• It is highly recommended to have this mount professionally installed.
F
• Supports VESA up to 600 x 400mm.
• This mount is designed to hold a maximum of 132 lbs (60 kg).
G
PARTS
A
x4
H
M8x15
B
x4
I
M6x15
C
x4
J
M5x15
D
x4
K
Ø5
E
x4
L
Ø6
F
x4
Ø8
M
G
x4
Ø15xØ8x4.5
N
Note: Parts A-G are used to attach
H
x2
your TV to the brackets in Step 3,
M6x20
but you will not need all of them. Use
the set that best fits your TV.
I
x2
M6x38
TOOLS
The following tools are recommended for this installation:
J
x6
Ø10x50
• Drill
• 5/32" drill bit for drywall
K
x6
M6x50
• 3/8" or 10mm drill bit for concrete
• Stud finder
L
x1
Level
• Phillips screwdriver
M
x1
N
x2
x4
M8x15
x4
M6x15
STEP 1
x4
M5x15
Level and Pre-drill Holes for Mount
• Use the included level to ensure the mount is correctly aligned and
x4
square, then mark holes for drilling.
Ø5
• Drill 6 holes for the mount to attach to the wall. Only drill into a solid wall,
or the wooden studs behind drywall or sheetrock.
x4
Ø6
• For drywall and studs, use a 5/32" drill bit.
• For solid/concrete walls, use a 3/8" or 10mm drill bit.
x4
Ø8
! x6
x4
Ø15xØ8x4.5
x2
M6x20
x2
M6x38
x6
Ø10x50
x6
M6x50
x1
Level
Towards Wall
x1
x2
• We recommend drilling 4 holes at the top of the mounting plate,
and 2 at the bottom.
F
F
G
G
H
H
I
STEP 2
I
Attach Mount to Wall
J
• If mounting to a solid wall,
J
insert the six wall anchors into the
holes drilled in Step 1, then screw
K
the base plate firmly to the wall
K
with the supplied screws.
• If mounting to drywall/studs,
L
screw the base plate firmly to the
L
wall with the supplied screws.
! x6
M
M
N
N
J
K
x4
Ø8
x4
Ø8
x4
x4
Ø15xØ8x4.5
Ø15xØ8x4.5
x2
x2
M6x20
M6x20
x2
M6x38
x2
M6x38
x6
Ø10x50
x6
Ø10x50
x6
x6
M6x50
M6x50
x1
Level
x1
Level
x1
x1
x2
x2
Need help?
Do you have a question about the TM65 and is the answer not in the manual?
Questions and answers