P5020.book Page 68 Friday, September 12, 2003 4:43 PM
L i f e B o o k P 5 0 0 0 N o t e b o o k
Problem
Possible Cause
Communication
Access control may
be disabled
is disconnected
soon after
connection to
the access point
68
S e c t i o n F i v e
In case of Windows XP, check the setting of "Enable network access
control using IEEE 802.1X".Refer to "Assigning parameters" on
page 53.
When restricting the access of wireless LAN clients using IEEE802.1X
authentication, put a check mark on "Enable network access control
using IEEE 802.1X".
When using at home, remove a check mark on "Enable network access
control using IEEE802.1X".
For the method of setting related with IEEE802.1X authentication, refer
to the access point manual.
Possible Solution