Warmrails Hyde Park Instruction Manual

::
.com
bathroomsource www.bathroomsource.com
Call 1-800-667-8721 anywhere in the US and Canada -
OPERATION
To operate, push the switch on the end of the Towel Stand by the
cord set. It will be illuminated when on and will be dull when off.
Your Warmrail Heated Towel Stand costs less or similar to run to a
regular light bulb. It will take approximately 45 minutes for the
Heated Towel Stand to reach its operating temperature, although this
time will be shorter if towels are in place.
The Warmrails Heated Towel Stand operates with a fixed power
output. However, when operated with several layers of towels over
the heated Towel Stand, the temperature will increase. Once the
towels are removed and where the rails are exposed, the
temperature of the Heated Towel Stand will quickly drop back.
Please note: damp or wet material that has either been dyed, or is
not colorfast, can cause discoloration in the finish if that material is
draped over a Heated Towel Stand while hot. Again, it is suggested
that items are dried by using a completely protective layer of material
such as a towel underneath.
Warning – this appliance is intended only for drying textiles
washed in water. Fabrics that contain soap or detergent residue
may show what appears to be scorch marks. However this is
simply the discoloration of residue.
Warmrails does not accept responsibility for any damage,
discoloration or other damage to any item regardless of
circumstance. To reduce the possibility of damage, do not
place any items other than towels directly on the Heated Towel
Stand – always have a completely protective layer of towels
between the Heated Towel Stand and any other item.
Warmrails at bathroom::accessories
U N L I M I T E D