Fujitsu Lifebook P7010 Bios Manual page 6

L i f e B o o k P 7 0 0 0 N o t e b o o k B I O S
Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu
Menu Field Options
CHS Format
Cylinders: A number
n
between 0 and
65,535
Heads: A number
n
between 1 and
16
Sectors: A number
n
between 0 and
63
Maximum Display only
n
Capacity:
Multi-Sec- Disabled
n
tor n 2 Sectors
Transfers: 4 Sectors
n
8 Sectors
n
16 Sectors
n
LBA Mode Disabled
n
Control: Enabled
n
Transfer Standard
n
Mode: Fast PIO 1
n
Fast PIO 2
n
Fast PIO 3
n
Fast PIO 4
n
Multiword
n
DMA 1
Multiword
n
DMA 2
Ultra DMA Disabled
n
Mode: n Mode 0
Mode 1
n
Mode 2
n
Mode 3
n
Mode 4
n
Mode 5
n
6
Default Description
Cylinders/Heads/Sectors
–— This item is active only when Hard Disk is selected as the type. This
field is changed by incrementing (pressing the [Spacebar]), by typ-
ing in the number, or using the "+" and "-" keys.
–— This item is active only when Hard Disk is selected as type. You can
change the value by incrementing (pressing the [Spacebar]), by typ-
ing in the number, or using the "+" and "-" keys.
–— This item is active only when Hard Disk is selected as type. You can
change the value by incrementing (pressing the [Spacebar]), by typ-
ing in the number, or using the "+" and "-" keys.
–— Displays the maximum capacity of the drive calculated from the
parameters of the hard disk when Auto is selected and the type is
identified as hard disk.
[16 Sec- This option cannot be changed when Auto is selected. Specify the
tors] number of sectors per block for multiple sector transfer.
[Enabled] Enables or disables logical Block Addressing in place of Cylinder,
Head, Sector addressing. This option cannot be changed when Auto
is selected.
[Multi- Selects the method for moving data to/from the drive. Autotype the
word DMA drive to select the optimum transfer mode. This option cannot be
2] changed when Auto is selected.
[Disabled] Selects the method for moving data to/from the drive. Autotype the
drive to select the optimum transfer mode. This option cannot be
changed when Auto is selected.