ROBOfiber RB-PEN25 User Manual

Thank you for choosing the RB-PEN25 Cleaning Pen. The RB-PEN25 Cleaner is a high-performance
device designed for cleaning the ferrule end faces of SC, ST and FC optical connectors. Please
carefully read this User Guide before starting to use RB-PEN25.

1. Safety

RB-PEN25 Cleaning Pen is designed for FC, SC and ST optical connectors only. Do
not attempt usage on other different connectors, both pen and connector can
be damaged.

2. Must Read

Do not attempt to disassemble RB-PEN25 unit, the unit might be rendered unusable or unsafe.
Please discard pen at the end of its lifecycle (cleaning cloth exhausted)
Do not re-use cleaning cloth (once used, cloth is contaminated and cannot be re-used, each cycle
provides a new segment of fresh and clean cleaning cloth).
Do not touch the cleaning cloth (avoid contaminating the new cloth agent)
Do not pull the cleaning cloth, leave cloth to be driven by the push-pull mechanism of pen.
Stop using pen when usage indicator is red (empty), this can cause damage to the optical
connector being cleaned.

3. Storage

Please avoid exposing the cleaning pen to direct sunlight or high temperature.
Keep cover on and closed when pen is not used.

4. Operating diagram

Item Name
A Tip
B Nozzle
C Lock Button
D Outer Shell
E Guide Cap
F Indicator
RB-PEN25 Fiber Optic Cleaning Pen – User's Guide
Leads the cleaning cloth to the optical connector end face.
Leads tip to the optical connector end face.
Push button to extend and contract the nozzle.
Push the outer shell (main body) to clean the connector.
Dust cap and cleaning adapter for connector plug.
Provides information on remaining cleaning cloth.
Indicator Status
Full
Little
Empty
Indicator for remaining cleaning cloth
Function
View of the Nozzle end