NRS Healthcare M00122 User Instructions

M00122
General Safety Warning
Please make sure that you read and follow
these instructions carefully. Keep these
instructions in a safe place for future reference.
1. INTENDED USE
The Kettle Tipper is an aid to help take the strain off
your wrists and to avoid the need to lift heavy kettles
full of water. It is suitable for most jug kettles of about
1 to 2 litres.
2. SAFETY
Make sure the kettle is securely fastened in the
tipper before use.
It is advised to always leave the kettle on the tipper
and use a small jug to fi ll with water to a recommended
maximum of ¾ full.
Position the kettle tipper away from sources of heat.
Take care to keep fl uids away from electrical sources.
USER INSTRUCTIONS
CORDLESS KETTLE TIPPER
Cordless Kettle Tipper
3. UNPACKING
Remove the packaging and check all parts carefully.
Contact your supplier immediately if parts are
missing or damaged and do not try and assemble.
4. ASSEMBLY/INSTALLATION
Fit the tilt plate to the main framework by hooking
over the frame.
The tilt-plate-stopper must be positioned behind the
bar across the base of the frame.
Secure the kettle base onto the tilt plate using the
clamps and wing-nuts provided.
Clamp the kettle in place with the 4 x plastic brakets
by tightening the wing-nuts on the underside of the
tilt-plate.
1