Advertisement
Advertisement
Table of Contents
Related Manuals for AudioRange OTE 1000
Summary of Contents for AudioRange OTE 1000
- Page 1 AudioRange OTE 1000 Wireless TV Headphones Easy Setup Guide...
-
Page 2: Important Safety Instructions
Important Safety Instructions Please read these safety instructions carefully before using your the Audiorange OTE-1000 WARNING: Consult your doctor or physician if you have a pacemaker before using This device is intended for home and personal use only. Keep the device dry and away from water. Water may damage the device. -
Page 3: Set-Up Preparations
Set-up Preparations Plug AC adapter into dock and place Locate Audio Connections on the headphones on dock to begin charging. back or side of your TV. A blue LED will flash as the headphones charge. Allow up to 2 hours to charge. AC Adapter on back panel If you are using RCA connections... -
Page 4: Analog Outputs
Installation using ANALOG Outputs STEP 1a: Turn on TV. There are two options for using the 3.5mm/RCA cable depending on your TVs connections. Option 1: Plug the red/white RCA cables into the matching ports on the TV. Then plug the 3.5mm in-line jack into the dock. - Page 5 STEP 2a STEP 3a On the side of the dock there is Remove headphones from the dock a switch for ANALOG or DIGITAL. and hold the power button for 3 seconds to turn the headphones on. Slide the switch to ANALOG. After 3-7 seconds you should begin to hear audio.
- Page 6 STEP 4a IMPORTANT: If you cannot You have successfully setup your Audiorange access your TV’s audio OTE-1000. settings, please refer to your TV manual for help. If you cannot hear any sound: Increase the volume on your headphone Increase the volume on the TV Check that your TV’s audio settings are set to...
-
Page 7: Digital Outputs
Installation using DIGITAL Outputs STEP 1b Turn on TV. Plug the optical cable* into the TV and dock. *Remove plastic protective tips at ends of cord. - Page 8 STEP 2b STEP 3b On the side of the dock there is Remove headphones from the dock a switch for ANALOG or DIGITAL. and hold the power button for 3 seconds to turn the headphones on. Slide the switch to DIGITAL. After 3-7 seconds you should begin to hear audio.
- Page 9 STEP 4b IMPORTANT: If you cannot You have successfully setup your Audiorange access your TV’s audio OTE-1000. settings, please refer to your TV manual for help. If you cannot hear any sound: Increase the volume on your headphone Increase the volume on the TV Check that your TV’s audio settings are set to...
Need help?
Do you have a question about the OTE 1000 and is the answer not in the manual?
Questions and answers