RANDOM ORBIT BUFFER + POLISHER ELECTRIC | 0.7 AMP | 6" | 3800 OPM OPERATOR’S MANUAL Model AJP100E-RM A Division of Snow Joe , LLC ® Form No. SJ-AJP100E-RM-880E-M-V1 IMPORTANT! 2. Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators –...
Page 3
Electrical Safety 7. Only use safety equipment that has been approved by an appropriate standards agency – Unapproved 1. Ground fault circuit interrupter (GFCI) protection should safety equipment may not provide adequate protection. be provided on the circuit(s) or outlet(s) to be used for Eye protection must be ANSI-approved and breathing this electric Buffer + Polisher.
Page 4
1. This Table 1. Method of Securing Extension Cord power tool is intended to function as a polisher. Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow Cord set Appliance cord all instructions listed below may result in electric shock, fire and/or serious injury.
11. Never lay the power tool down until the accessory has movement at the point of pinching. Abrasive wheels may also come to a complete stop. The spinning accessory may break under these conditions. Kickback is the result of power tool grab the surface and pull the power tool out of your control.
Safety Symbols The following table depicts and describes safety symbols that may appear on this product. Read, understand and follow all instructions on the machine before attempting to assemble and operate. Symbols Descriptions Symbols Descriptions To reduce the risk of injury, Safety alert.
Page 7
Know Your Electric Buffer + Polisher Read the owner’s manual and safety instructions carefully before operating the electric Buffer + Polisher. Compare the illustration below to the electric Buffer + Polisher in order to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference.
Snow Joe + Sun Joe customer service center at ® ® 1-866-SNOWJOE (1-866-766-9563). Buffer + polisher NOTE: Do not discard the shipping carton and packaging material until you are ready to use the Buffer + Polisher. The packaging is made of recyclable materials.
Page 9
5. To start, position the unit on the area to be polished, NOTE: Applying too much wax is a common error. If the grip the tool firmly and press the ON/OFF button once to Terrycloth Buffing Bonnet becomes saturated with wax, turn ON.
® sunjoe.com or contact the Snow Joe + Sun Joe customer ® ® Sun Joe customer service center at 1-866-SNOWJOE ® service center at 1-866-SNOWJOE (1-866-766-9563). (1-866-766-9563). Model and Serial Numbers WARNING! Disconnect the power cord before performing any maintenance task.
Page 11
NOTE: Accessories are subject to change without any obligation on the part of Snow Joe + Sun Joe to provide notice of such ® ® changes. Accessories can be ordered online at sunjoe.com or via phone by contacting the Snow Joe + Sun Joe customer ® ® service center at 1-866-SNOWJOE (1-866-766-9563).
Page 12
To obtain a replacement part or product, please visit warranty. Some states do not allow exclusions of incidental or snowjoe.com/help or email us at help@snowjoe.com for consequential damages so the above exclusions may not apply instructions. Please be sure to register your unit beforehand to in all states.