Fujitsu Lifebook L470 Manual page 129

To reset the Save-to-Disk parameters, use the
procedure below.
1. From the shut Down menu, please select the
restart option.
2. When the Fujitsu Logo appears on the screen
press F8 immediately, before the Windows 98
banner appears on the screen.
3. Select 6, Safe mode command prompt
only, then press Enter.
4. At the C:\> prompt, type cd fujitsu,
then press Enter.
5. At the C:\>fujitsu prompt, type
phdisk /delete /file, then
press Enter.
6. Then press any key to restart the computer.
7. When the Fujitsu Logo appears on your
screen press F8 immediately, before the
Windos 98 banner appears on the screen.
8. At the C:\> prompt, type cd fujitsu,
then press Enter.
C o n f i g u r i n g Y o u r L i f e B o o k L S e r i e s
9. At the C:\>fujitsu prompt, type
phdisk /create /file, then press Enter.
10. Then press any key to restart the computer.
C A U T I O N
Never use PARTITION in place of FILE
with the PHDISK Utility or you will
reformat your internal hard drive and
all data, applications and operating
system will be destroyed.
L i f e B o o k L S e r i e s f r o m F u j i t s u
C A U T I O N
Using Phdisk requires that your notebook
be running in real DOS mode. Since
Windows NT 4.0 cannot be run in real
DOS mode, you will need to either cre-
ate a bootable DOS diskette and use it to
boot your notebook or boot the system
with the Recovery CD (the Recovery CD
that came with your L-Series notebook
pre-installed with Windows NT 4.0) and
click the cancel button of the Recovery
Program Welcome Screen to exit to DOS.
Once your NT notebook is running in
real DOS mode, follow the steps in the
sections above to use the Phdisk utility.
115