Advertisement
Table of Contents
MASINA
FLOOR LAMP
INSTALLATION
1
- Firstly, separate the shade collar and fixing ring by
removing the screws.
1
- Holding the base of the lamp, guide the neck of the
shade onto the gallery section of the base.
- This will need to be held together and supported
throughout stage 2.
gallery
MAINTENANCE
- Lacquered brass and glass should be wiped with a soft duster.
TECHNICAL
- 1 x E27 LED bulb (UK/EU)
or
- 1 x E26 LED bulb (USA)
www.bertfrank.co.uk
+44 (0)207 164 6482
2
- Insert the fixing ring into the main shade.
- Secure the shade collar to the fixing ring using
the screws.
A
B
2
- Guide the white washer down through the shade.
- Screw the thumb screws through the white washer
and into the gallery to sandwich and secure the
shade in place.
A
inside shade
B
Advertisement
Table of Contents
Related Manuals for Bert Frank MASINA
Summary of Contents for Bert Frank MASINA
- Page 1 MAINTENANCE - Lacquered brass and glass should be wiped with a soft duster. TECHNICAL MASINA - 1 x E27 LED bulb (UK/EU) FLOOR LAMP - 1 x E26 LED bulb (USA) www.bertfrank.co.uk +44 (0)207 164 6482 INSTALLATION - Firstly, separate the shade collar and fixing ring by - Insert the fixing ring into the main shade.
- Page 2 BULB REPLACEMENT - Turn off the light at the mains. - Replace bulb by screwing it into lamp holder. This product is only suitable for connection to the native power supply to which the unit was specifically manufactured. It is for indoor use only, and not suitable for a bathroom location.
Need help?
Do you have a question about the MASINA and is the answer not in the manual?
Questions and answers