Table of Contents
Advertisement
L i f e B o o k E S e r i e s B I O S
Secondary Master Submenu of the Main Menu
The Secondary Master submenu allows you to configure secondary ATA devices.
Main
Type:
Multi-Sector Transfers:
LBA Mode Control:
Transfer Mode:
Ultra DMA Mode:
F1
Help
ESC
Exit
Table 3: Fields, Options and Defaults for the Secondary Master Submenu of the Main Menu
Menu Field
Options
Type:
Auto
None
CD-ROM
Hard Disk
CHS Format
Cylinders:
A number between
0 and 65,535
Heads:
A number between
1 and 16
Sectors:
A number between
0 and 63
8
PhoenixBIOS Setup Utility
Secondary Master [UJDA750FDVD/CDRW-(SM)]
[Auto]
[Disabled]
[Disabled]
[Standard]
[Disabled]
Select Item
Select Menu
Figure 3. Secondary Master Submenu
Default
[Auto]
–—
–—
–—
-/Space
Change Values
Enter
Select
Sub-Menu
Description
NOTE: The Type field does not appear as a drop-down menu. Tap
the spacebar to cycle through the selections.
Selects the ATA/ATAPI device type. Select Auto to have the type
automatically identified by the BIOS at POST. If None is selected, all
of the following setup items do not appear. Select CD-ROM or Hard
Disk for appropriate drive type installed at this connection.
Cylinders/Heads/Sectors
This item appears only when Hard Disk is selected as the type. This
field is changed by incrementing (pressing the [Spacebar]) or by typ-
ing in the number.
This item appears only when Hard Disk is selected as type. You can
change the value by incrementing (pressing the [Spacebar]) or by
typing in the number.
This item appears only when Hard Disk is selected as type. You can
change the value by incrementing (pressing the [Spacebar]) or by
typing in the number.
Item Specific Help
Select ATA/ATAPI drive
installed here.
[Auto]
The BIOS auto-types the
drive on boot time.
Except [Auto]
You enter parameters of
the drive.
[None]
The drive is disabled.
F9
Setup Defaults
F10
Save and Exit
Advertisement
Table of Contents
