Advertisement
1.Installation instruction for outdoor unit T-08C
Pic 1
1.Take out the screws fixed in the surface shell.(Pic.1)
2.Put bottom shell on rain cover, use screws to fix them both
on the wall, then make the wire pass through the hole in the
bottom shell.(Pic.2)
3.Connect the outdoor and indoor unit well, pull down surface
shell on the bottom shell, then press it to fix them well.(Pic.3)
4.Use screws to fix them again.(Pic.4)
2.Installation instruction for outdoor unit T-09C
Pic 1
1.Take out the screws fixed in the surface shell.(Pic 1)
2.Fix rain cover onto the wall by screws; make wire pass through the hole in the
bottom shell.(Pic. 2)
3.Connect with the outdoor unit well, and install the surface shell to the bottom
shell, then fix them by screws.(Pic. 3)
Pic 2
Pic 3
Pic 4
Pic 2
Pic 3
Advertisement
