Table of Contents
Advertisement
TV Operation
RAPID
TUNE
MUTE
INPUT
ACTION
SELECT
▲▼◄►/
SET
CH▲▼
AV Input Terminal 2
Selecting Input Mode
Method 1:
Press CH ▲▼. The display will change as follows.
Notes:
• The diagram at right is an example.
• TV CH 2 and CABLE CH 1 represent
the lowest channels in memory,
while TV CH 69 and CABLE CH 125
represent the highest channels in
memory.
16
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
NUMBER
keys
1
100 key
2
VOL+/-
LINE 1:
Signal of source connected to AV Input terminal 1 is displayed.
(Rear of the unit.)
LINE 2:
Signal of source connected to AV Input terminal 2 is displayed.
TUNER:
Signal of source connected to VHF/UHF terminal is displayed.
LINE2
(TV)
CH2
(CABLE)
CH1
(TV)
CH69
(CABLE)
LINE1
CH125
When selecting CABLE channels 100 to 125 with the NUMBER
keys, first press the 100 key, and then enter the remaining two
digits.
Example 1:
To select channel 125, first press the 100 key, then 2, then 5.
Example 2:
To select channel 12, first press the 1 key, then 2.
Example 3:
To select channel 2, first press the 0 key, then 2.
Method 2:
Press INPUT. The display will change as follows.
LINE1
Method 3:
Press ACTION for MAIN MENU.
Press ▲▼◄► to select "TV", then press SET for
SET UP TV screen.
3
Press ▲▼ to select "INPUT SELECT," and then
press SET to select "TUNER", "LINE 1", or "LINE 2."
4
Press ACTION twice to exit this mode.
Using the CH/VOL Button
Select desired channel:
Press CH ▲▼ or NUMBER keys.
Adjust desired volume level:
Press VOL + or VOL -.
Using the Number and 100 keys
LINE2
TUNER
MAIN MENU
DVD
LOCK LANGUAGE
TV
CLOCK
CH
SELECT:
SET:SET
END
:ACTION
SET UP TV
CAPTION
INPUT SELECT
:TUNER
SET UP VIDEO/AUDIO
DVD VOL ADJUST :+2
SELECT:
SET:SET
END
:ACTION
Advertisement
Table of Contents
