Fujitsu LifeBook C-6651 User Manual page 55

B5FH-4941.book Page 47 Friday, December 14, 2001 2:18 PM
1. Turn on the power to your LifeBook notebook using
the power switch.
2. Allow the system to start booting and press the F2
key once the Fujitsu logo appears on the screen. This
will open the main menu of the BIOS setup with the
current settings displayed. (See BIOS Setup Utility on
page 27 for more information) Use the right arrow
key to select Info in the BIOS Setup menu.
The System Memory and the Extended Memory
capacity, as detected by your LifeBook notebook during
the Power On Self Test (POST), are displayed at the
bottom of the Info menu screen. The chart below shows
you the possible displays that can be shown on the main
menu screen.
P O I N T
If the total memory displayed is incorrect, check that
your memory upgrade module is properly installed. (If
the module is properly installed and the capacity is still
not correctly recognized, see the Troubleshooting sec-
tion starting on page 53)
Installed
On Board Slot 1 Total RAM
Installed
256MB 0 256MB
256MB 128MB 384MB
256MB 256MB 512MB
256MB 512MB 768MB
Displayed
System Extended
Memory Memory
640K 255MB
640K 383MB
640K 511MB
640K 767MB
M e m o r y U p g r a d e M o d u l e
47