Power Cord Connection; Connection Of Communication Wire Between Indoor Unit And Outdoor Unit (Or Indoor Unit) - Lennox VRF VE8K007C432P Installation Manual

Multi Variable Air Conditioners Cassette Type Indoor Unit

5.2 Power Cord Connection

Every unit should be equipped with a circuit breaker for short-circuit and overload
protection. In general, circuit breaker is at OFF status.
During operation, all indoor units and outdoor units belonging to the same system must be kept
energized status. Otherwise, the unit can't operate normally.
(1) Detach the electric box lid.
(2) Let the power cord pass through the wiring through-holes.
(3) Connect wires according to Fig. 5.2.1.
(4) Fix the power cord with wiring clamp.
(5) The wire diameter of power cord can't be less than 18AWG.
5.3 Connection of Communication Wire between Indoor Unit and Outdoor
Unit (or Indoor Unit)
(1) Detach the electric box lid.
(2) Let the Communication cable pass through the wiring through-holes.
(3) Connect the communication wire to terminal D1 and D2 of indoor 4-bit wiring board, as
shown in Fig.5.3.1.
Fig.5.2.1
Fig.5.3.1
16