Using A Measuring Aid For Liquid Detergent; Adding Detergent And Care Product; Starting The Programme - Bosch WM14N0H2 User Manual And Assembly Instructions

Note: Ensure that there is no laun-
4.
dry trapped in the door.
Close the door.
Using a measuring aid for li-
quid detergent
If you order the measuring aid as an
accessory, you must use the measur-
ing aid.
Press down on the insert and re-
1.
move the detergent drawer.
1
Insert the measuring aid.
2.
Insert the detergent drawer.
3.
Adding detergent and care
product
Notes
¡ Please read the information in the
"Safety" → Page 4 and "Preventing
material damage" → Page 11 sec-
2
tions to ensure that you use the
appliance safely.
¡ Do not use the measuring aid for
liquid detergent for gel detergents,
washing powder, or if Prewash or
"Ready in" time are activated.
Requirement: Find out the optimum
dosage for "detergent and care
product." → Page 30
Pull out the detergent drawer.
1.
Pour in detergent.
2.
→ "Detergent drawer", Page 20
If required, add the care product.
3.
Push in the detergent drawer.
4.

Starting the programme

Note: If you want to change the time
until the programme ends, set the
"Ready in" time first.
Press Start / Nachlegen.
▶
a The drum rotates and load detec-
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
Basic operation en
33