Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Elko iNels eLAN-RF-003
Summary of Contents for Elko iNels eLAN-RF-003
- Page 1 eLAN-RF-003 1 of 18 29.10.2020 Page 02-95/2016 / rev.10...
-
Page 2: Table Of Contents
eLAN-RF-003 Introduction ............................. 4 Installing the eLAN-RF-003, IP address .................... 5 Logging in to the web interface eLAN-RF-003 ................. 6 Settings ............................7 Description of functions ........................8 Adding RF actuators to the floorplan ....................16 RF control actuators .......................... 17 Starting up scenes .......................... - Page 3 eLAN-RF-003 Before you begin The instruction manual provides information on installing and operating the device. The instruction manual is always a part of the supply. Only perform installation after becoming thoroughly familiar with this User Guide and device functions. Problem-free function of the device also depends on the way it was shipped, stored and handled.
-
Page 4: Introduction
eLAN-RF-003 1. Introduction Congratulations on purchasing the Smart RF box eLAN-RF-003 control unit, an element of the RF Control wireless system. • The smart RF box Enables you to control your electrical installation by smartphone, tablet, Samsung smart-watch Gear S2 or SMART TV. •... -
Page 5: Installing The Elan-Rf-003, Ip Address
eLAN-RF-003 2. Installing the eLAN-RF-003, IP address Connect the eLAN-RF-003 to the power source, connect it to your local network via Ethernet cable. Your local network (router) assigns the eLAN-RF-003 its IP address. Dynamic IP address assignment (DHCP) is enabled by default. List of usable ports: More detailed description of the port use: https://en.wikipedia.org/wiki/List_of_TCP_and_UDP_port_numbers... -
Page 6: Logging In To The Web Interface Elan-Rf-003
eLAN-RF-003 3. Logging in to the web interface eLAN-RF-003 Run the web browser. In the Internet browser in the panel Address add the IP address of your eLAN-RF-003. After confirming the entered IP address, the web server's login page will come up. ... -
Page 7: Settings
eLAN-RF-003 4. Settings After logging in your browser opens a window where you can see the devices associated to the room. If you set multiple rooms, you can switch between them by arrows, located in the upper right corner. Clicking on the Settings icon displays the menu 7 of 18 29.10.2020 Page... -
Page 8: Description Of Functions
eLAN-RF-003 Description of functions By clicking on the Setting elan the basic menu settings are displayed. By pressing Log out, you will log out of the web interface eLAN-RF-003. By pressing the button Accounts, you will display a window for changing login data. - Page 9 eLAN-RF-003 By pressing the button Save settings, you can save the current settings of your eLAN-RF- 003 including network settings. The button IP Settings is to configure network settings that you can change any time based on your network. In case you set the static IP address, you have to find it by using the application (see detailed manual for applications).
- Page 10 eLAN-RF-003 The button RF mode is used to switch the mode of your eLAN-RF-003. Repeater The Repeater function is an independent function of eLAN-RF-003 and is used to increase range between RF controllers (system elements) and RF elements. Use: an eLAN-RF-003 device configured for a repeater can only be connected to the supply voltage, and it will then function just the same as the RFRP-20.
- Page 11 eLAN-RF-003 Router The Router function is used to extend the distance and control of RF elements by connecting two eLANs into the LAN network. The first eLAN (so-called Master) must be set during configuration in the Router function, it receives all RF commands of controllers via an RF signal.
- Page 12 eLAN-RF-003 Button Date & Time Here the IP address of the NTP server is set by default, which determines for the eLAN the precise time via the Internet. You can also set the time zone in which the eLAN is located. By selecting Daylight Saving Time, you can manually set the daylight saving time.
- Page 13 eLAN-RF-003 Button Reboot – to restart the device eLAN-RF-003. Button Devices is used for adding RF actuators to the eLAN-RF-003. Button (+) - add a new RF element: 1. Product Type – select RF element 2. Address – enter the address of the RF element that is listed right on the box of the added RF element (six-character code).
- Page 14 eLAN-RF-003 Button Rooms displays created rooms. By pressing the button (+). If you click on the button (+), a table is displayed in which you fill in: Name of room 1. Label gives an arbitrary name to the room (you can use diacritical marks, gaps and others...) 2.
- Page 15 eLAN-RF-003 Buttonl Scenes – Here any scenes are created based on user requirements. It is possible to create scenes only after you add rooms and actuators. Button (+) - add a new scene: 1. Label - enter any name of the scene (you can use diacritical marks and spaces in between…).
-
Page 16: Adding Rf Actuators To The Floorplan
eLAN-RF-003 Button Floorplans here you can add floorplans (images, layouts….). Button (+) - add a new floorplan: 1. Select the required image for the floorplan (stored in your PC). 2. ID – enter the name of the floorplan. Confirm by pressing OK. The number of floorplans is limited by the memory size of the eLAN-RF-003. -
Page 17: Rf Control Actuators
eLAN-RF-003 RF control actuators Mobile phone help application Clicking on the component icon (1) to start the function settings (switch-off delay ...). Click on the name of the component (2) to display all its functions, where you can select which function is performed (delayed closing - including setup time, brightness adjustment ...). -
Page 18: Error Messages On The Web Interface
eLAN-RF-003 Error messages on the web interface 404 - Unavailability of eLAN over the network (disconnected from power supply, disconnected from Ethernet, other error) 401 - Authorization error (key expiration or not initialized in time - measured in seconds) 18 of 18 29.10.2020 Page 02-95/2016 / rev.10...