Advertisement
Quick Links
Read This First!
1. Locate the plastic bag which contains the assembly parts.
2. Do not attempt to install nor assemble a toilet support without first
reading the instructions!
3. Find the two Parts Sheets "A & B" and check contents. Call us if found
lacking.
4. Read the Extensions Assembly pages. Vertical leg extensions are needed
for Standard & ADA heights.
5. Find and use the toilet Profile Page to identify your toilet. Use the number
in the center of your choice.
6. Find the Assembly Page (s) corresponding to your toilet number.
7. Assemble your support by exchanging the necessary pieces using the proper
numbered instructions.
8. After assembling your support, find and use the Mounting Instructions.
Call if you have any problems or suggestions!
Universal Toilet Support
AL-66049
Advertisement
Summary of Contents for ALCO AL-66049
- Page 1 6. Find the Assembly Page (s) corresponding to your toilet number. 7. Assemble your support by exchanging the necessary pieces using the proper numbered instructions. 8. After assembling your support, find and use the Mounting Instructions. Call if you have any problems or suggestions! AL-66049 Universal Toilet Support...
- Page 2 Read All of This! Most standard height toilets are between 14" - 17" from the floor to the top of the bowl and will need the (EX-2) piece installed. Profile #4 toilets usually won't need an extension piece at all. If not extension piece is used, then you may put the plastic rivets directly into the permanent spring leg to cover the W' assembly holes.
- Page 3 EX-4 EX-2 EX-6* 1---- i-- - -t' *The EX-6 is not included In the box. .£ u call (800) 323-4282 if needed. SK 2 4 ® FLIP & REMPLV AX·l ,__ _ _,, USAGE .____,, I / SK 2 9 SK 4 ____ :'\_...
- Page 4 *NotinBox Plastic Rivets AL-82787 Call us for part (800) 323-4282 Adjustable Foot SK943H Threaded Insert Chrome Nuts 1" Long Stainless Bolts, Washers, And Nuts for Hanger Parts Page: B...
-
Page 5: Mounting Instructions
MOUNTING INSTRUCTIONS AL-66049 • Take assembled Toilet Support and loosen the bolts which hold the “Hanger” and “S-Bar” together leaving them loosely connected. (See Figure #2) This is the most important advice that is often overlooked but will make the assembly much easier! •... - Page 12 > - - - - - - r - _ _ _ _ _ _ _ ___.._ ..., --:\ SKlO Profile #6 Parts Assembly AL-66049 info@alcosales.com 800.323.4282 www.alcosales.com Universal Toilet Support...
Need help?
Do you have a question about the AL-66049 and is the answer not in the manual?
Questions and answers