Fujitsu Lifebook B3010D Bios Manual page 11

Table 4: Fields, Options and Defaults for the Serial/Parallel Port Configurations Submenu of Advanced
Menu
Menu
Options
Field
Serial Port: • Disabled
• Enabled
• Auto
• 3F8 - 3FF
I/O
Address:
• 2F8 - 2FF
• 3E8 - 3EF
• 2E8 - 2EF
Interrupt: • IRQ 3
• IRQ 4
• IRQ 10
• IRQ 11
Touch • Disabled
Panel: • Enabled
• Auto
I/O • 3F8-3FF
Address: • 2F8-2FF
• 3E8 - 3EF
• 2E8 - 2EF
Interrupt: • IRQ 3
• IRQ 4
• IRQ 10
• IRQ 11
Parallel • Disabled
Port: • Enabled
• Auto
Mode: • Output Only
• Bi-directional
• ECP
I/O • 378 - 37F
address: • 278 - 27F
• 3BC - 3BF
Interrupt: • IRQ 5
• IRQ 7
Default Description
[Enabled] Configures the serial port using either no configuration (Dis-
abled), a user defined configuration (Enabled), or by allowing
the BIOS or OS to choose the configuration (Auto).
[3F8 - 3FF] Allows user to set the serial port base I/O address when serial
port is Enabled.
[IRQ 4] Allows user to set the serial port interrupt when serial port is
Enabled.
[Enabled] Enables or disables the Touch Panel, or allows the Plug & Play
operating system to choose the configuration (Auto).
[2E8 - 2EF] Allows user to set the touch panel I/O address when the
touch panel is Enabled.
[IRQ 3] Allows user to set the touch panel interrupt when the touch
panel is Enabled.
[Enabled] Configures the parallel port using either no configuration
(Disabled), a user defined configuration (Enabled), or by
allowing the BIOS or OS to choose the configuration (Auto).
[Bi-directional] When the parallel port is enabled this option is available
allowing the user to set the mode for the parallel port.
Bi-directional allows two-way transfer of information
between your notebook and a connected parallel device.
Output Only (Half Duplex) allows information to be
transferred in only one direction, from your notebook to the
printer or similar device. ECP Mode allows communication
with the ECP class of parallel I/O devices.
[378 - 37F] Allows user to set the parallel port base I/O address when the
parallel port is Enabled.
[IRQ 7] Allows user to set the parallel port interrupt when the parallel
port is Enabled.
A d v a n c e d M e n u
11