LG BH100 Training Manual page 2

Published January 2007 by LG Education & Product Engineering
Customer Service (and Part Sales): 1-800-243-0000
Technical Support (and Part Sales): 1-800-847-7597
USA Website: www.lgusa.com
Customer Service Website: us.lgservice.com
B2B Service Website: aic.lgservice.com
Training Website: www.LGCSAcademy.com
IMPORTANT SAFETY NOTICE
The information in this training manual is intended for use by persons possessing an adequate background in electrical
equipment, electronic devices, and mechanical systems. In any attempt to repair a major appliance, personal injury and
property damage can result. The manufacturer or seller maintains no liability for the interpretation of this information, nor
can it assume any liability in conjunction with its use. When servicing this product, under no circumstances should the
original design be modified or altered without permission from LG Electronics. Unauthorized modifications will not only
void the warranty, but may lead to property damage or user injury. If wires, screws, clips, straps, nuts, or washers used to
complete a ground path are removed for service, they must be returned to their original positions and properly fastened.
CAUTION
To avoid personal injury, disconnect the power before servicing this product. If electrical power is required for diagnosis or
test purposes, disconnect the power immediately after performing the necessary checks. Also be aware that many household
appliances present a weight hazard. At least two people should be involved in the installation or servicing of such devices.
Failure to consider the weight of an appliance could result in physical injury.
ESD NOTICE
Some of the electronic componments in appliances are electrostatic discharge (ESD) sensitive. ESD can weaken or damage
the electronics in these appliances in a manner that renders them inoperative or reduces the time until their next failure.
Connect an ESD wrist strap to a ground connection point or unpainted metal in the appliance. Alternatively, you can touch
your finger repeatedly to a ground connection point or unpainted metal in the appliance. Before removing a replacement
part from its package, touch the anti-static bag to a ground connection point or unpainted metal in the appliance. Handle
the electronic control assembly by its edges only. When repackaging a failed electronic control assembly in an anti-static
bag, observe these same precautions.
REGULATORY INFORMATION
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 if the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is
operated in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the
receiving antenna; Increase the separation between the equipment and the receiver; Connect the equipment to an outlet
on a different circuit than that to which the receiver is connected; or consult the dealer or an experienced radio/TV
technician for help.
COMPLIANCE
The responsible party for this device's compliance is LG Electronics Alabama, Inc.; 201 James Record Road, Huntsville, AL,
35813.