Fujitsu Lifebook B142 User Manual page 59

Port Replicator
External Floppy
Attachment Knob Disk Drive Port
Parallel Port
Port Replicator
Attachment Knob
PS/2 Port
Serial Port
External
Monitor Port
Figure 4-2 Port Replicator Rear Panel
Docking Connector
Docking Connector
Figure 4-3 Connecting the Port Replicator
U s e r I n s t a l l a b l e
Port Replicator
Attachment Knob
Port Replicator
Attachment Knob
Figure 4-4 Securing the Connection
To Install the Port Replicator:
The Port Replicator can be installed on your
notebook while the power is on, while in
Suspend mode, or while the power is off.
1. Open the Docking Connector cover on the
rear panel of your notebook to expose the
Docking Connector.
2. Align the Docking Connector on the rear
panel of your notebook with the Docking
Connector on the front panel of the Port
Replicator. (Figure 4-3.)
3. Push the Port Replicator and the notebook
together until the docking connectors are
fully engaged. (Figure 4-3.)
L i f e B o o k B S e r i e s f r o m F u j i t s u
F e a t u r e s
4. Turn the Port Replicator Attachment Knobs
clockwise to secure the connection between
the Port Replicator and the notebook. You
may have to push the knob in slightly to
engage the threads. (Figure 4-4.)
Port Replicator
Attachment Knob
Docking Connector
Figure 4-6 Removing the Port Replicator
Port Replicator
Attachment Knob
Figure 4-5 Releasing the Connection
Docking Connector
49