Fujitsu Lifebook A6120 User Manual page 167

Verifying Information about OmniPass
After you have completed installing OmniPass and restarted your system, you may wish to check the
version of OmniPass on your system.
To check the version information of OmniPass:
1
From the Windows Desktop, double-click the key-shaped OmniPass icon in the taskbar (usually located in the
lower right corner of the screen),
or,
Click the Start button, select Settings, and click Control Panel. Double-click Softex OmniPass in the Control
Panel, and the OmniPass Control Center will appear. If it does not appear, then the program is not properly
installed,
or,
Click the Start button, select Programs, and from the submenu select the Softex program group, from that
submenu click OmniPass Control Center.
2
Select the About tab at the top of the OmniPass Control Panel. The About tab window appears with version
information about OmniPass.
Uninstalling OmniPass
F
OR UNINSTALLATION
ADMINISTRATIVE PRIVILEGES TO THE SYSTEM
ADMINISTRATIVE PRIVILEGES
PROCEEDING WITH
1
Click Start on the Windows taskbar. Select Settings, and then Control Panel.
2
Double-click Add/Remove Programs.
3
Select OmniPass, and then click Change/Remove.
4
Follow the directions to uninstall the OmniPass application.
5
Once OmniPass has finished uninstalling, reboot your system when prompted.
, O P
MNI ASS REQUIRES THAT THE USER UNINSTALLING
,
LOG OUT AND THEN LOG IN WITH AN ADMINISTRATOR USER BEFORE
O P
MNI ASS UNINSTALLATION
To remove the OmniPass application from your system:
167 - Introducing the Optional Fingerprint Sensor Device
. I
F YOUR CURRENT USER DOES NOT HAVE
.
O P
MNI ASS HAVE