Chapter 2: Connections And Setup; Tv Button; Initial Setup - FFALCON UF3 Series Operation Manual

Chapter 2

TV Button

If the batteries in your remote control are run down, you can use the button on your TV set.
The model has only one
You can turn on the TV by pressing the
While the TV is on, press the
multi-function menu, please refer to the figure below.
CH+ CH-
Standby
Tips: Short click to change, long click to select.
• Press to move the highlight to the next function selection.
• Press and hold the button for more than 2 seconds to confirm your selection.
Note:
You can follow the on-screen guide to operate. Figures and illustrations are provided for reference only and may
vary depending on the model.

Initial Setup

The first time you switch the set on, the
process. Follow the on-screen instructions to finish the initial setup process such as selecting the language, pairing
your remote, connecting to the network, and more. During each step, either make a choice or skip the step. If you
skip a step, you can perform the setup later from the settings menu.
button. It may work just as Power on/Standby button, or as a multi-function controller.
button on the TV set.
button to display the multi-function menu. More information about how to use the
Volume+ Volume- Source
Welcome wizard
Connections and Setup
OK
appears, which guides you through the initial setup
4