Table of Contents
Advertisement
Drive1 Submenu of the Main Menu
The Drive1 submenu allows you to configure secondary ATA devices.
Main
Drive1:
Device
Vendor
LBA Mode
PIO Mode
Async DMA
Ultra DMA
Type
Table 3: Fields, Options and Defaults for the Drive1 Submenu of the Main Menu
Menu Field
Options
The fields that appear on this screen are for display only, and reflect the default settings for the Drive1 device.
Device
---
Vendor
---
LBA Mode
---
PIO Mode
---
Async DMA
---
Ultra DMA
---
BIOS Setup Utility
Advanced
Security
:ATAPI CDROM
:HL-DT-ST DVDRAM_GSA_T1ON
:Supported
:4
:MultiWord DMA-2
:Ultra DMA-2
[Auto]
vv
v02.59 (C)Copyright 1985-2006, American Megatrends, Inc.
Figure 3. Drive1 Submenu
Default
Hard Disk
(Device Name)
Supported
4
Multiword DMA-2
Ultra DMA-5
Boot
Info
Exit
Select Serial ATA/IDE
drive installed here.
[Auto]
The BIOS auto-types the
drive on boot time.
[None]
The drive is disabled.
F1: Help
Description
Displays the type of Drive1 ATA/IDE drive.
Displays the maker of the Drive1 device.
Displays whether Logical Block Addressing is supported by the
device.
Displays the method for moving data to/from the Drive1
device.
Displays the Multiword DMA method for moving data to/from
the Drive1 device.
Displays the Ultra DMA method for moving data to/from the
Drive1 device.
M a i n M e n u
Esc: Exit
7
Advertisement
Table of Contents
