Yukon HLS80E Assembly, Testing, Operation, Servicing & Storage Instruction

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

8 TONNE HYDRAULIC

LOG SPLITTER

ASSEMBLY, TESTING, OPERATION, SERVICING

& STORAGE INSTRUCTION

ELECTRIC

WARNING!

READ and UNDERSTAND this manual completely before using The log splitter. All operators

of this equipment must read and completely understand all safety information, operating

instructions, maintenance and storage instructions.

Please check all bolts, screws, handles, clamps & clips are tight before each use.

Failure to properly operate and maintain the log splitter could result in serious injury to the

operator and bystanders from moving parts that can crush or cut, flying objects, burns, fire

or explosion, escaping high pressure hydraulic fluid, or carbon monoxide poisoning.

Table of Contents

Need help?

Do you have a question about the HLS80E and is the answer not in the manual?

Questions and answers

Summary of Contents for Yukon HLS80E

Page 1 8 TONNE HYDRAULIC LOG SPLITTER ASSEMBLY, TESTING, OPERATION, SERVICING & STORAGE INSTRUCTION ELECTRIC WARNING! READ and UNDERSTAND this manual completely before using The log splitter. All operators of this equipment must read and completely understand all safety information, operating instructions, maintenance and storage instructions. Please check all bolts, screws, handles, clamps &...
Page 2: Table Of Contents
TABLE OF CONTENTS Page 1.0. Disclaimer 1.1. About your Log Splitter ....................................... 2.0. Safety Usage 2.1. General Safety ........................................3.0. Assembly Instructions 3.1. Parts for Assembly ........................................ 3.2. Assembling the log splitter ....................................4.0. Pre-checks Before Operations 4.1. Electrical requirements ....................................... 4.2.
Page 3: Disclaimer
1.0 DISCLAIMER 1.1. About your Log Splitter ATTENTION: Congratulation on purchasing your new 8tonne Yukon log All Rental Companies and Private Owners who loan splitter this equipment to others! This log splitter is designed to split wood logs using a All persons to whom you rent, loan or use this the log hydraulically powered moving wedge.
Page 4: Safety Usage
2.0 SAFETY USAGE 2.1. General Safety UNDERSTAND YOUR LOG SPLITTER EXTENSION CORDS • • Read and understand the owner’s manual and labels Improper use of extension cords may cause inefficient affixed to the log splitter. Learn its application and operation of the log splitter which can result in limitations as well as the specific potential hazards peculiar overheating.
Page 5 • AVOID INJURY FROM UNEXPECTED ACCIDENT • NEVER LEAVE TOOL RUNNING UNATTENDED Always pay full attention to the movement of the log Don’t leave tool until it has come to a complete stop. pusher. DISCONNECT POWER • Do not attempt to load the log on until the log pusher has Unplug when not in use, before making adjustments, stopped.
Page 6: Assembly Instructions
3.0 ASSEMBLY INSTRUCTIONS 3.1. Parts for Assembly Hydraulic Log Splitter Front Support Legs Wheels length QTY: 1 QTY: 1 QTY: 2 Wheel Cap Front Support Rubber Feet Back Support Rubber Feet QTY: 2 QTY: 2 QTY: 2 8 tonne Electric hydraulic Log Splitter Assembly, Installation, Care, Maintenance useage Instruction Manual...
Page 7: Assembling The Log Splitter
3.2. Assembling the Log Splitter WARNING! CLOSELY INSPECT ALL LOG SPLITTER COMPONENTS. (See Machine Components section on page 15-16 of this manual for diagram of components,) • If you have missing components, contact the seller • If you have damaged components, contact the seller SAVE BOLTS FROM PACKAGING: Some packaging bolts are used to assemble the log splitter, while others are used for attachments or spares TURN OVER THE LOG SPLITTER...
Page 8 Step 3 Using a pair of circlip pillers install the circlip (Part E) on the axle. Step 4 Put on axle cap. (Part D Step 4 Attach rubber feet (Part F) to legs on engine TURN OVER THE LOG SPLITTER Turn machine over and let sit for 2 minutes before using 8 tonne Electric hydraulic Log Splitter Assembly, Installation, Care, Maintenance useage Instruction Manual...
Page 9: Pre-Checks Before Operations
4.0 PRE-CHECKS BEFORE OPERATIONS Before operating the log splitter, the Bleed Screw should be loosened by some rotations until air can go in and out of the oil tank smoothly. Air flow thru the Bleed Screw hole should be detectable during the log splitter is under operations.
Page 10: Operations Instruction
5.0 OPERATIONS INSTRUCTION Step 1 Plug into the Power souce Step 2 Push and hold the green button on the engine. Pull down control lever (Once released wood pusher will automatically retract) Correct Incorrect Incorrect Must be held together. or machine won’t operate. 8 tonne Electric hydraulic Log Splitter Assembly, Installation, Care, Maintenance useage Instruction Manual...
Page 11: Storage, Usage & Maintenance
6.0 STORAGE, USAGE & MAINTENANCE 6.1. Loading Log • Load the log onto beam with a straight cut end against the • Hold bark side. Hold the bark side of logs when loading or splitting wedge - positioned for a lengthwise cut positioning, never the ends.
Page 12: Freeing A Jammed Log
IMPORTANT If a part needs replacement only use genuine Yukon parts that meets the manufacturer’s specifications. Replacement parts that do not meet specifications may result in a safety hazard or poor operation of the log splitter.
Page 13: Specifications
7.2. Log-Splitter Specification Model Number HLS80E Power 2000W Motor 240V~ 50Hz 2KW IP54 S6 40% Wheel Size 8”...
Page 14: Troubleshooting Guide
8.0 TROUBLESHOOTING Problem Probable Cause Suggested Remedy Motor does not Power not turn on Make sure the power is turn on at the power point turn on Make sure the Green For Engine to operate. the green power button must be hep down. Power Button is held down.
Page 15 The log pusher Have you check the oil Make sure oil levels are correct moves jerkily or levels vibrating a lot Is the item on flat solid Place item on flat level surface surface? Have the breath screw Undo the breath screws been undone? Fault with the ram or There is problem with the pump or hydrocoral system.
Page 16: Warranty
9.0 WARRANTY • Kmate Pty Ltd provides a 12 month warranty for this • A claim may be refused if the defective claim has arisen product when used for domestic purposes. Commercial for reasons other than a manufacturers fault or defective use of the product will void all warranty.