Summary of Contents for jcb JCB-18IL
- Page 1 INSPECTION LAMP INSTRUCTION & USER MANUAL JCB-18IL Original Instructions IM-18IL-EN...
- Page 2 The month and year of manufacture can be found within the product serial number e.g. MMYYPPPAXXXXX. Where production month (MM) and production year (YY) are included. JCB-18IL Instruction & User Manual...
-
Page 3: Table Of Contents
BATTERY SAFETY CHARGER SAFETY COMPONENT LIST TOOL TECHNICAL DATA OPERATING INSTRUCTIONS Intended Use Battery Turning On/ Off To Hang the Inspection Light Adjustable Head Maintenance Transport and Storage WARRANTY STATEMENT Conditions Terms EC DECLARATION OF CONFORMITY JCB-18IL Instruction & User Manual... -
Page 4: General Power Tool Safety Warnings
Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. JCB-18IL Instruction & User Manual... -
Page 5: Power Tool Use And Care
Such preventive safety measures reduce the risk of starting the power tool accidentally. JCB-18IL Instruction & User Manual... -
Page 6: Battery Safety
Damaged or modified batteries may exhibit unpredictable behaviour resulting in fire, explosion or risk of injury. Do not expose battery pack or tool to fire or excessive temperature. Exposure to fire or temperatures above 130°C may cause an explosion. JCB-18IL Instruction & User Manual... -
Page 7: Charger Safety
To reduce risk of injury, only charge JCB rechargable batteries listed in this manual. The charger and battery packs are specifically designed to work together. Other types of batteries may burst causing fire and personal injury. -
Page 8: Component List
SPOTLIGHT SWIVEL JOINT ANGLE JOINT ON/ OFF SWITCH GRIP J HOOK (NOT VISIBLE) CHARGER* BATTERY PACK* - PLEASE REFER TO TABLE ON PAGE 11 FOR BATTERY INFORMATION BATTERY TEST BUTTON AND CHARGE INDICATOR* *If applicable JCB-18IL Instruction & User Manual... -
Page 9: Tool Technical Data
Times given as a guide only. Battery charge and discharge times dependant on age, usage and condition. CHARGER TECHNICAL DATA Charger Code Input Power Output JCB-18VFC 220 - 240V ~ 50-60Hz 70W 2.4A JCB-18SFC 220 - 240V ~ 50-60Hz 105W 4.0A JCB-18IL Instruction & User Manual... -
Page 10: Operating Instructions
Press the battery release button and remove stable surface. Plug the charger into a 230 V the battery from the tool. power point. Connect the battery to the charger so that it clicks into place. JCB-18IL Instruction & User Manual... -
Page 11: Intended Use
If the LEDs on the charger do not come on when charging: Check that the charger’s mains adaptor is properly plugged into the power point and that the charger is switched on Check that the battery is correctly inserted in the charger JCB-18IL Instruction & User Manual... -
Page 12: Turning On/Off
Regularly check all fasteners, screws and Lift the J hook from the slot. bolts to make sure that they are tight. Use the J hook to hang the inspection light. Tighten any loose screws immediately or serious injury could occur. JCB-18IL Instruction & User Manual... -
Page 13: Transport And Storage
Always carry the tool using the purpose- designed handle. Ensure that the tool is not at risk of tipping over or exposed to excessive vibration and shocks during transport, especially if the tool will be transported by car or other vehicle. JCB-18IL Instruction & User Manual... -
Page 14: Warranty Statement
Warranty cover commences from the date of purchase on the retail sales receipt and is valid only for JCB Tools products purchased within the UK bearing the CE mark and a visible serial number. In the unlikely event your JCB Power Tool is subject to a manufacturing fault within the warranty period, JCB Tools may repair the product by replacing defective parts free of charge at our discretion. -
Page 15: Conditions
Repairs have not been undertaken using non-genuine spare parts. JCB Power Tools used for Hire Fleets or as part of B2B and Service Contracts are not covered by these terms and conditions. JCB Tools standard 3 Year and extended 5 Year Warranties excludes the following (where relevant): Components normally subject to wear such as carbon brushes. -
Page 16: Ec Declaration Of Conformity
EN 61547:2009 The person authorized to compile the technical file: Date: 20/09/2018 Signature: Name/ title: Mya Yee Lwin / Quality Assurance Manager Address: JCB Tools, 55 Romsey Industrial Estate, Romsey, SO51 0HR, UK. Company REG: 11062222 JCB-18IL Instruction & User Manual... - Page 17 JCB-18IL Instruction & User Manual...