Table of Contents
Advertisement
Quick Links
Tripod Quick Release Mount (ACCSS8008) Installation for the Focus M
and S Series
Quick Steps
1. Order the
Quick Release Package
2.
Gather parts and tools.
3.
4.
Attach the base plate to tripod platform.
5.
Attach the mount plate under scanner.
6.
Overview
®
The FARO
Laser Scanner Focus
from your tripod. Using the steps in this article you can install the quick release components to the scanner and tripod.
Once the components are installed, just lower the scanner onto the tripod base plate aligning the lock holes, turn the
scanner to orient it relative to what you want to scan, and rotate the outer ring of the scanner mount plate to lock the
scanner to the tripod.
https://knowledge.faro.com/Hardware/3D_Scanners/Focus/Tripod_Quick_Release_Mount_-ACCSS8008-_Installation_for_the...
®
from
FARO
Sales. See the Prepare section of this article for part numbers.
M
S
and Focus
Quick Release allows you to easily attach and detach the Focus
Updated: Tue, 09 Nov 2021 02:45:07 GMT
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Faro ACCSS8008
- Page 1 Tripod Quick Release Mount (ACCSS8008) Installation for the Focus M and S Series Quick Steps ® 1. Order the Quick Release Package from FARO Sales. See the Prepare section of this article for part numbers. Gather parts and tools. Set up the tripod.
- Page 2 Prepare Time to Complete 20 minutes Items Needed • Laser Scanner Quick Release package—FARO Part #: ACCSS8008 ® • FARO Focus ® • FARO Focus ® • FARO Focus ® • FARO Focus Supported Hardware • FARO Focus X 30/130/330 •...
- Page 3 1. Ensure that the base plate set screw is recessed below the surface of the base plate by inserting the 3 mm silver hex key into the hexagonal recess in the center of the set screw. https://knowledge.faro.com/Hardware/3D_Scanners/Focus/Tripod_Quick_Release_Mount_-ACCSS8008-_Installation_for_the… Updated: Tue, 09 Nov 2021 02:45:07 GMT...
- Page 4 3. Firmly tighten the base plate to the platform using the 3/16" black hex key inserted into the hexagonal recess on the base plate. 4. Tighten the base plate set screw using the 3 mm silver hex key inserted into the recess at the center of the set screw. https://knowledge.faro.com/Hardware/3D_Scanners/Focus/Tripod_Quick_Release_Mount_-ACCSS8008-_Installation_for_the… Updated: Tue, 09 Nov 2021 02:45:07 GMT...
- Page 5 With the key inserted, slightly rotate the outer ring to find a spot where the key easily seats into one of the six hexagonal holes of the mount plate inner ring. Ensure that the key has engaged completely with the hole in the inner ring. https://knowledge.faro.com/Hardware/3D_Scanners/Focus/Tripod_Quick_Release_Mount_-ACCSS8008-_Installation_for_the… Updated: Tue, 09 Nov 2021 02:45:07 GMT...
- Page 6 3. With the scanner contacting the base plate, turn the scanner to orient it relative to the location you want to scan. 4. On the scanner mount plate, rotate the outer ring until the scanner is securely locked onto the tripod. https://knowledge.faro.com/Hardware/3D_Scanners/Focus/Tripod_Quick_Release_Mount_-ACCSS8008-_Installation_for_the… Updated: Tue, 09 Nov 2021 02:45:07 GMT...
- Page 7 (B). While firmly holding the knurled outer ring of the mount plate (C), rotate the 3/16 hex key in a counter- clockwise direction to separate the base plate from the mount plate. https://knowledge.faro.com/Hardware/3D_Scanners/Focus/Tripod_Quick_Release_Mount_-ACCSS8008-_Installation_for_the… Updated: Tue, 09 Nov 2021 02:45:07 GMT...
- Page 8 Heat Protection Cover and Manual for the Focus M70 and S70/S150/S350 • Focus3D Panorama Tripod Quick Release Mount Installation Keywords quick release adapter, setup, install, unpack, quick release appliance, quick release attachment https://knowledge.faro.com/Hardware/3D_Scanners/Focus/Tripod_Quick_Release_Mount_-ACCSS8008-_Installation_for_the… Updated: Tue, 09 Nov 2021 02:45:07 GMT...
Need help?
Do you have a question about the ACCSS8008 and is the answer not in the manual?
Questions and answers