Bottom Cover - Lenovo ThinkCentre M90q Gen 2 Manual

Removal steps
Note: While installing, ensure that you connect the gray cable to the connector labeled 1 (auxiliary) and the
black cable to connector labeled 2 (main) on the card.

Bottom cover

Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
For access, do the following:
• Remove the computer cover. See "Computer cover" on page 43.
• Turn over the computer so that the bottom cover is facing up.
50
M70q Gen 2 and M90q Gen 2 User Guide