Summary of Contents for Kensington Pocket Media Center
Page 1
High Speed USB 2.0 Hub Side Please read this short manual to learn valuable information about the proper use and installation of your new Kensington Pocket Media Center. Register your new Kensington Pocket Media Center on line at www.register.kensington.com. Pocket Media Center • 1...
Macintosh with ® ® 1. With your computer running, plug the Kensington Pocket Media Center into an PowerPC or higher available USB port as described on page 4. • USB port (USB 2.0 recommended for faster data transfer) 2.
There is no need to turn off your computer before connecting or disconnecting a USB device. The Kensington Pocket Media Center is a USB 2.0 device. If you plug the reader The Kensington Pocket Media Center supports 15 types of memory cards.
Page 4
IMPORTANT: If you have inserted a memory card into the slot and still do not see drive icon. the disk drive icon on your Mac OS desktop, unplug the reader from your computer’s USB port and then plug it in again. 6 • Pocket Media Center Pocket Media Center • 7...
Remove the memory card from the reader. When you insert a memory card under Windows XP, a window may pop up with a choice of options. Choose the option you want and click OK. 8 • Pocket Media Center Pocket Media Center • 9...
Page 6
Select USB Mass Storage Device and then click the Stop button. 10 • Pocket Media Center Pocket Media Center • 11...
Click OK, and then close the Safely Remove Hardware window. The Kensington Card Reader can transfer data at up to 480 Megabits per second. If your computer, operating system, and USB port (and USB hub if you use one) d.
Interference Statement • You may find the answer to your problem in the Frequently Asked Note: The Kensington Pocket Media Center model no. 33216 has been tested and found Questions (FAQ) section of the Support area on the Kensington Web to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Need help?
Do you have a question about the Pocket Media Center and is the answer not in the manual?
Questions and answers