Advertisement
Quick Links
Advertisement
Related Manuals for A4Tech RFKBS-15A
Summary of Contents for A4Tech RFKBS-15A
- Page 1 R a d i o W i r e l e s s K e y b o a r d U s e r’s G u i d e Model: RFKBS-15A , RFKB-15A...
- Page 2 THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
- Page 3 turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient of relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-
Page 4: Getting Ready
Install the AAA alkaline batteries in the Wireless mouse (for the A4Tech Wireless Desktop). Remove the battery compartment cover on the bottom of the mouse by pressing down on the tab. - Page 5 Setting Up the Keyboard or Wireless Desktop Make sure that your computer is turned off. Connecting the Receiver’s Keyboard Cable: When connecting to an IBM AT keyboard port, use the 5-pin DIN connector already attached to the keyboard cable. When connecting to a PS/2-style, 6-pin DIN keyboard port, remove the AT adapter.
- Page 6 Installing the Mouse Software-iWheelWorks and Keyboard software-iKeyWorksOffice Before you can take advantage of the many features your mouse and keyboard offers, you must install the driver. The driver is in the installation diskette that came packaged with your mouse and keyboard Windows 95/98/Me/2000/NT4.0 installation Insert the installation diskette into your floppy disk drive.
- Page 7 The Wireless keyboard and mouse ID code Each keyboard and mouse is assigned a unique ID code at manufacture, so the receiver only picks up the signal from your mouse and prevents other Wireless keyboard or mouse radio signals from operating on your computer.
- Page 8 Changing the Wireless Mouse ID Code You can use a new Wireless Mouse on your computer without changing the Radio receiver; you just need to change the ID code. Refer to the following: 1. Press [Shift + Alt + F11] or [Shift + Alt + F12] to call up the Wireless Mouse ID Code window. 2.