Table of Contents
Advertisement
contact, it is automatically saved to the phonebook.
Wi-Fi
Learn to use your device's wireless networking capabilities
to activate and connect to any wireless local area network
(WLAN) compatible with the IEEE 802.11 b/g/n standards.
You can connect to the internet or other network devices
anywhere an access point or wireless hotspot is available.
Your device uses non-harmonised frequency and is
intended for use in all European countries. The WLAN
can be operated in the EU without restriction indoors,
but cannot be operated outdoors in France.
››Activate the WLAN feature
In Idle mode, open the application list and select Settings →
Wireless and network → Wi-Fi settings → Wi-Fi.
An active WLAN running in the background will
consume battery power. To preserve battery power,
activate the WLAN only when needed.
››Find and connect to a WLAN
1.
In Idle mode, open the application list and select Settings
→ Wireless and network → Wi-Fi settings.
The device will automatically search for available WLANs.
2.
Select a network under Wi-Fi networks.
3.
Enter a password for the network (if necessary).
4.
Select Connect.
››Add a WLAN manually
1.
In Idle mode, open the application list and select Settings
→ Wireless and network → Wi-Fi settings → Add Wi-Fi
network.
2.
Enter the SSID for the network and select the security
type.
3.
Set the security settings depending on the selected
security type.
4.
Select Save.
››Connect to a WLAN using a Wi-Fi Protected
Setup (WPS)
Using WPS, you can connect to a secured network.
Advertisement
Table of Contents
