JB INDUSTRIES REVOLVER 26233 Quick Start Manual

Liquid Charging
1
10
3
7
6
5
4
9
8
Repair Parts
REVOLVER ® SERIES MANIFOLDS
1 M2-102N
Hanging hook
2 MR-502 Handle and screw
Ball valve kit including:
3 MR-BVK
(2) seals, (1) stem, (2) o-rings
and (1) washer
4 MR-444 1/4" retainer fitting
5 MR-446
3/8" retainer fitting
2
6
MR-611 Throttle ball
7 MR-610 Ball
8 MR-504 1/4" hose holder sleeve and o-rings
9 MR-506 3/8" hose holder sleeve and o-rings
3
10 MR-525
Sight glass with o-ring
See your wholesaler for a complete line of gauges.
WARNING: This product can expose you to chemicals including lead which are
known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
Limited Warranty Limited Warranty
Manifold bar has a lifetime warranty, while the components, (gauges, Manifold bar has a lifetime warranty, while the components, (gauges,
hoses, handles, hose holders, etc.), are covered under the limited hoses, handles, hose holders, etc.), are covered under the limited
warranty policy. Products are warrantied for a period of one year from warranty policy. Products are warrantied for a period of one year from
date of shipment by JB and limited to repair, replacement or credit, date of shipment by JB and limited to repair, replacement or credit,
if in our opinion are defective due to workmanship and/or materials. if in our opinion are defective due to workmanship and/or materials.
Defective components should be returned to the wholesaler from which Defective components should be returned to the wholesaler from which
the product was purchased for evaluation. Manifolds are designed for the product was purchased for evaluation. Manifolds are designed for
use with all refrigerants except Ammonia (R717). Working pressures use with all refrigerants except Ammonia (R717). Working pressures
are limited to gauge dial range. Use of this manifold under any other are limited to gauge dial range. Use of this manifold under any other
conditions voids the warranty. conditions voids the warranty.
For Professional Use Only For Professional Use Only
JB manifolds are designed for use by technically trained HVAC/R JB manifolds are designed for use by technically trained HVAC/R
service engineers only. Due to the high pressures encountered in all service engineers only. Due to the high pressures encountered in all
systems that this manifold will be used on, plus the dangers due to systems that this manifold will be used on, plus the dangers due to
the physical and chemical nature of refrigerants and oils present in all the physical and chemical nature of refrigerants and oils present in all
systems, misapplication could result in injury or death. systems, misapplication could result in injury or death.
JB INDUSTRIES
JB INDUSTRIES
630.851.9444 sales@jbind.com
Part No. 26000-308 0818
• •
REVOLVER
®
4-VALVE BALL MANIFOLD
JB INDUSTRIES