Table of Contents
Advertisement
Quick Links
Modellbahn Digital Peter Stärz
Dresdener Str. 68 - D-02977 Hoyerswerda - +49 3571 404027 - www.firma-staerz.de - info@firma-staerz.de
Degree of difficulty:
The Loco Controller DHR-PIC is a comfortable and easy to
use hand control unit with SX-Bus-Plug supporting several
protocols.
Additionally to Selectrix also the digital formats Selectrix-2,
DCC and Motorola are supported. That allows the Control
Panel SPF-PIC not only to be used in combination with the
Professional Central Unit ZS1, but also with the Digital Central
Unit ZS2 or the MTTM FCC.
Five keys and one rotary switch and the 3-digits display grant
easy access to controlling locomotives in address range 0 to
999 - also with one hand only.
Special features
-
supports Selectrix, Selectrix-2, DCC, Motorola
-
Easy handling
Loco Controller
with 3-digit Display
for Selectrix, Selectrix-2, DCC and Motorola
with SX-Bus-Plug
easy
medium
difficult
Necessary skills:
-
Assembly of the PCB
-
Drill, countersink und saw/mill the case
-
Dismantle and wiring a 5-pole cable
Table of content
Special features ................................................................................1
Technical specifications ....................................................................2
Compatibility ..................................................................................2
Kit contents........................................................................................2
Maintenance and care ......................................................................2
Assembly instruction .........................................................................3
Component layout diagram on the PCB .......................................3
Populated PCB ..............................................................................3
Drilling template.............................................................................4
Description of operation....................................................................5
Bringing into service......................................................................5
Signs and symbols ........................................................................5
Selection of a locomotive ..............................................................5
Controlling locomotives .................................................................5
DHR-PIC
v1a-2013
page 1 of 5
Advertisement
Table of Contents
Summary of Contents for Modellbahn Digital Peter Stärz Selectrix DHR-PIC
-
Page 1: Table Of Contents
Modellbahn Digital Peter Stärz Dresdener Str. 68 – D-02977 Hoyerswerda – +49 3571 404027 – www.firma-staerz.de – info@firma-staerz.de Loco Controller DHR-PIC with 3-digit Display v1a-2013 for Selectrix, Selectrix-2, DCC and Motorola with SX-Bus-Plug Degree of difficulty: easy Necessary skills: Assembly of the PCB medium Drill, countersink und saw/mill the case... -
Page 2: Technical Specifications
Technical specifications Kit contents Compatibility Please first verify that the kit contains all the components listed below. The following table lists the digital formats and address ranges supported by the Loco Controller DHR-PIC. The Loco Controller General parts: DHR-PIC connects to the central unit via the SX-bus. 1x PCB That makes the Loco Controller DHR-PIC compatible with all 1x 28-pin IC socket... -
Page 3: Assembly Instruction
Component layout diagram on the PCB Assembly instruction Assemble the kit in the order of these instructions. All components (except the push buttons, rotary switch and 7-segment-elements) are placed on the top side of the PCB (marked “top”) as close to the PCB as possible and soldered on the bottom side of the PCB (marked “Bottom”). -
Page 4: Drilling Template
7. Use drill of 2.0 mm pitch to pre-drill all holes. 11. Mounting into the case After concluding the assembly of the main PCB and the display module, they are mounted to the top case part. 1. Insert the 4 long counter-sunk screws from the case front (A, B, C, D), add 2 washers each and tightened with 1 short threaded stud. -
Page 5: Description Of Operation
Selection of an address Description of operation After the selection of the digital format the address of the locomo- tive can be chosen. Bringing into service Blinking numbers highlight the current position which is being changed. After assembling the Loco Controller DHR-PIC can be hot-plugged Iterates addresses in single to any of the model railway’s SX-bus jacks.
Need help?
Do you have a question about the Selectrix DHR-PIC and is the answer not in the manual?
Questions and answers