Advertisement
Quick Links
Quick Start
Guide
Starting Out
When you first get started, this is
how your cart will look. The rest
of this guide will explain getting
from here to cleaning windows.
READ THIS
Read this guide before using
your system. Failure to follow
these directions voids all
warranties.
View the quick start video:
www.abcwindowsupply.com/soloquickstart
Attach Bypass
Attach the bypass hose assembly
to the male brass bypass fitting on
the output side.
Advertisement
Summary of Contents for Solo TS5010
- Page 1 READ THIS Quick Start Read this guide before using Guide your system. Failure to follow these directions voids all warranties. View the quick start video: www.abcwindowsupply.com/soloquickstart Starting Out When you first get started, this is how your cart will look. The rest of this guide will explain getting from here to cleaning windows.
- Page 2 Quick Connect Screw the quick connect with shut off to the system outlet. Insert Pole Tubing Turn Quick Connect valve to off. Plug in pole tubing to Quick Connect. Open valve on Quick Connect. Attach Source Hose Connect source hose to system inlet.
- Page 3 Adjust Bypass Open the RO bypass to fully open position. Place open end of bypass hose so that water flows to a desirable location. Weigh down end if necessary. Turn on source water. Clean Windows Enjoy your Solo System!
- Page 4 Optional If your source water is over 200 TDS, or your output is over 10 TDS, add a DI filter such as the Rover. We recommend using 1/2” hose. Shut Down Procedure 1 1. Shut off flow of pure water to brush.
Need help?
Do you have a question about the TS5010 and is the answer not in the manual?
Questions and answers