Huawei R250D-E Hardware Installation And Maintenance Manual page 88

Table of Contents

R250D-E

Hardware Installation and Maintenance Guide

Requirements for Feeding the Printer

The label paper consists of two layers and has undergone multiple processing procedures such

as printing and cutting. No matter what model of printer you use, feed in the labels one page

at a time. To avoid jamming the labels, never use the auto-feed mode.

Feed in the label paper in the correct direction to ensure that the text is printed in a correct

position.

Requirements for the Printed Label

Make sure that the printed labels satisfy the following requirements:

Writing Labels

Writing Tools

To make sure the printouts are clear and legible, use black markers instead of ball-point pens

to write the labels.

If no marker is available, black ball-point pens are allowed, although not recommended.

Compared with ball-point pens, water-proof markers are better. When writing with a ball-

point pen, do not leave the oil on the label, which may contaminate the label and blur the

words.

Font

For the sake of legibility, use standard block letters and numbers as shown in

(Times New Roman).

Table 5-21 Standard typeface for handwriting

Determine the size of characters based on the number of letters or digits and ensure that the

characters are distinct and tidy.

Issue 01 (2016-09-30)

All the printouts must be on the label, and nothing should be printed on the backing layer

of the label page.

Contents in the cells should be aligned in the center. In a single-line printout, the

dividing lines and the word "TO:" should not be covered by printed characters.

When the cells are merged and the printouts are made in multiple lines, avoid covering

the word "TO:" when printing the text. Use the space bar to move the text to the next

line.

NOTE

The delivered marker has two nibs. Use the smaller nib to write the labels.

Huawei Proprietary and Confidential

5 Appendix

Table 5-21

Table of Contents

50082922