Panasonic BT-H1700P Service Manual page 68

Multi-format monitor, video input card, component/rgb input card
Hide thumbs Also See for BT-H1700P:
Table of Contents

Advertisement

COMPONENT SIGNAL LOW-LIGHT WHITE BALANCE ADJUSTMENTS (LOW: D65)
Measuring Instruments
Card (Slot)
Test Points
Adjustment Points
Notes: • Perform the following adjustments after completing the Low-Light White Balance Adjustment.
• Set the COLOR TEM./BAL. data in the Setup Menu to "00".
• The values adjusted with WP become the reference values for the following adjustment. When this data is changed, it is required
to re-adjust the white balance data of all of the adjustment signals (Component, NTSC and PAL).
When re-adjusting the 1080/60i signal, use the WJ.
1. Apply the 1080/60i component 10-step gray scale signal to INPUT A.
2. Set COLOR TEMP. of "COLOR TEMP./BAL." in the Setup Menu to LOW.
3. Set the PHASE, CHROMA, BRIGHT and CONTRAST potentiometers on the front panel to the center click positions.
4. Adjust WP01 and WP03 in the Service Menu using the color temperature meter so that the color temperature is set as shown below.
(Do not touch WP02.)
Color temperature: LOW (D65). x = 0.313, y = 0.329 (Reference value)
5. Ensure that the white balance tracking is correct from the gray scale steps with lower color temperatures to those with higher color temperatures.
If the white balance tracking is deviated in darker steps, adjust WP04 to WP06 (Low-Light) to correct it.
(Do not set the values of WP04 to WP06 no more than "50".)
6. Vary the adjustment signal and adjustment data, and re-perform adjustments in steps 1 to 5 above (see Table 19).
Adjustment Signal
COMMON
1080/60i
(Common to 1080/24psf)
720/60p
480/60i
(Common to 576/50i)
480/60p
(Common to 576/50p)
66
Signal generator (Component 10-step gray scale signal)
Color temperature meter
Component/RGB Input Card (Slot 1)
W*01 (Drive (R)), W*03 (Drive (B)), W*04 (Cut Off (R)),
W*05 (Cut Off (G)), W*06 (Cut Off (B)) [Service Menu]
Function
Drive
Cut off
Drive
Cut off
Drive
Cut off
Drive
Cut off
Drive
Cut off
Adjustment Data
R
WP01
WP04
WP05
WJ01
WJ04
WJ05
WL01
WL04
WL05
WF01
WF04
WF05
WH01
WH04
WH05
Table 19
G
B
WP03
WP06
WJ03
WJ06
WL03
WL06
WF03
WF06
WH03
WH06

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bt-ya701pBt-ya702p

Table of Contents