Table of Contents
Advertisement
Connecting an External Display Device
2
Connect the VGA cable (15-pin) to the connected VGA
adapter and then connect the other end of the VGA cable to
the VGA port of the monitor or the TV.
External
Monitor
VGA
Adapter
3
Connect the power cord of the connected monitor, TV or
projector and turn the power on.
Press the
+
4
Display Manager screen appears where you can select a
display device.
TV
key combination once. Then the Easy
Since pressing the
changes the selection, select a display device.
Projector
LCD
HDMI
LCD + HDMI Clone
LCD + HDMI
DualView
If the screen is not switched even if you press the
Display Manager program.
Alternatively, to set up dual view:
Open the Display Settings window in the Control Panel,
select Monitor 2 and select the Expand to fi t to this
monitor checkbox to set dual view. For more detailed
information, refer to the Windows online help.
key while holding down the
+
key combination, you have to install the Easy
Chapter 2.
51
Using the computer
key
Advertisement
Table of Contents
