Summary of Contents for M&G DuraVent DuraBlack
- Page 1 Installation Instructions Single-wall interior stovepipe for connecting wood stoves to manufactured chimney...
- Page 2 A MAJOR CAUSE OF VENT actions: • Installation of any damaged DuraBlack RELATED FIRES IS FAILURE component. TO MAINTAIN REQUIRED • Unauthorized modification of any DuraBlack component CLEARANCES (AIR • Installation of any component part not SPACES) TO COMBUSTIBLE manufactured or approved by DuraVent. MATERIALS.
- Page 3 the Slip Connector, until it is next to the bead. Figure 1b- Trim Plate Style Connector Using the two, pre-punched holes in the Trim Collar as a guide, drill two 1/8” diameter holes in the Support Box. Screw the Trim Collar to the Support Box, using the two sheet metal screws provided with the kit.
- Page 4 M&G DuraVent lIMIteD lIfetIMe Warranty M&G DuraVent, Inc. (“DuraVent”) provides this limited lifetime warranty for all of its products with the exception of Ventinox® (lifetime), and PolyPro® (ten years). Subject to the limitations set forth below, DuraVent warrants that its products will be free from defects in material or manufacturing, if properly installed, maintained and used.
Need help?
Do you have a question about the DuraVent DuraBlack and is the answer not in the manual?
Questions and answers