Advertisement
The Master CLIP must be turned "ON"
to link all Remote CLIP.
Charging / Built-In Battery
1. Remove Neoprene Cover.
2. Insert CLIP into Multi-Charger.
3. Corresponding LED indicator:
RED=Charging,
GREEN=Full Charge
4. Run time - 4 hours.
Operation
1)
Identify the MASTER and power it ON.
2)
Turn all REMOTE Clips ON.
3)
Plug in lightweight headsets (if included).
4)
Set listening volume level as desired.
Signal Strength Indicator
The CLIP provides hands free full duplex communication up to ¼ mile. A
continuous beep indicates loss of signal / operating range has been exceeded.
Multi-Port charger
Volume up/down
Power button (center)
The Cyber Headset
with lightweight back band
Microphone Mute Button
IN – Mic is Live, Transmit
OUT – Mic gain is paused
Microphone Placement
For optimum performance place directly in front of,
and appx. 1/4 " from mouth.
Back Band worn behind
& below hairline
Advertisement
