Table of Contents
Advertisement
Step 4b
Log in to your router's configuration page from the web browser and click on
Wireless.
Then click Wireless security.
Setup Enable box is checked. Click the Add Wireless Device Wizard button.
Step 4c
Enter the Pin Code in the Pin Number box and click Connect.
After a few moments both the router configuration screen and the adapter configuration
screen should show a message telling you that you are connected.
Step 4d
Click Continue on the router configuration screen.
Note:
If you cannot connect successfully with WPS, you need to log in to your router's
configuration and click on Wireless. Then click Wireless security. Make sure that the
Wi-Fi Protected Setup Enable box is checked.
Make sure that the Wi-Fi Protected
33
Advertisement
Table of Contents
