Specification - LG 43LF510A Service Manual

NOTE : Specifications and others are subject to change without notice for improvement.
1. Application range
This specification is applied to the LB56A chassis.
2. Requirement for Test
Each part is tested as below without special appointment.
(1) Temperature: 25 °C ± 5 °C(77 °F ± 9 °F), CST: 40 °C ± 5 °C
(2) Relative Humidity: 65 % ± 10 %
(3) Power Voltage
: Standard input voltage (AC 100-240 V~, 50/60 Hz)
* Standard Voltage of each products is marked by models.
(4) Specification and performance of each parts are followed
each drawing and specification by part number in
accordance with BOM.
(5) The receiver must be operated for about 5 minutes prior to
the adjustment.
4. Model General Specification
* HDMI 1.4 with Deep Color is only apply for FHD Model
No. Item
1. Market
2. Broadcasting system
BAND
3. Channel Storage VHF/UHF
Cable
4. Receiving system
5. Video Input
6. Component Input
7. USB Input
8. AV Audio Output
9. D-SUB
10. HDMI Input
11. Audio Input
Copyright © LG Electronics. Inc. All rights reserved.
Only for training and service purposes

SPECIFICATION

3. Test method
Specification
NON EU
PAL/SECAM B/G/D/K,
PAL I, NTSC-M PALB/B
PAL(BG,I,BB) NTSC(M)
01-C69 2-78
S1-S47 1-71
Upper Heterodyne
PAL, SECAM, NTSC
Y/Cb/Cr, Y/ Pb/Pr
MP3, JPEG,Movie
RCA-RF/AV/HDMI Audio Output
Service Only
HDMI-DTV, Only PCM MODE
AV&Component &PC
- 6 -
(1) Performance: LGE TV test method followed
(2) Demanded other specification
- Safety : CE, IEC specification
- EMC : CE, IEC
China(DK)
C1-C69
S1-S47
2EA
Rear (1EA), Except RGB PC Models
Side (1EA)
Rear (1EA)
Rear (1EA)
AV input 2EA
2EA
Remarks
LGE Internal Use Only