General Setup - Pyle PDV177BK User Manual

GENERAL SETUP

CHARGING THE UNIT
This player is powered by a lithium-polymer battery. It features a high ratio of energy to weight. It has
no memory e ect and it can be recharged at any time regardless of whether it is fully or partially
discharged. It takes about six hours to fully charge the battery and a fully charged battery can be used for
up to two hours. Connect the attached AC/DC adaptor to the DC INPUT jack on the unit, then plug the
adaptor into a 240V AC outlet.
Note: Make sure to switch off the unit before charging. The charging indicator LED will change from RED
to GREEN to indicate that the battery has been fully charged.
Usage and Maintenance of the rechargeable battery.
1. The working temperature of the rechargeable battery ranges from 0°C (32°F) to 45°C (113°F)
2. Always unplug the unit when it is not being used unless it is being charged.
3. Heat is inevitably produced during playback, this is normal. However switch off and allow it to cool down.
4. Avoid banging the battery and keep it away from heat and moisture.
CONNECTING TO THE TV
• This unit can be connected to a TV in order to enjoy high quality music, movies etc with a TV.
• Use an AV cable to connect the AV OUT jack on the unit to the AV IN jack of a TV.
• DVD player has sound and video input jacks for connecting external audio and video inputs.
Menu Operation
1. Press [SETUP] on the remote control or on the unit to show the setup menu.
2. Press [LEFT] / [RIGHT] to select an item. The submenu of the selected item will be instantly shown.
3. Press [UP] / [DOWN] to select an item in the submenu, then press [OK] / [ENTER] / [RIGHT] to enter.
Use [UP] / [DOWN] to select an option, then press [OK] / [ENTER] to con rm or press [LEFT] to cancel.
4. Press [UP] / [DOWN] to continue to set other items in the submenu.
5. Press [LEFT] to go back to the superior menu of the current one.
6. Press [SETUP] again and press [ENTER] / [OK] to exit the setup menu.
1. GENERAL SETUP PAGE
There are six items in the GENERAL SETUP PAGE. They are TV DISPLAY, ANGLE MARK, OSD LANGUAGE,
CAPTIONS, SCREEN, SAVER and LAST MEMORY.
1.1 TV DISPLAY
4:3 PANSCAN
If the unit is connected to a conventional TV set, a wide-screen image will be displayed on the screen
in its native aspect ratio with some part on the left and right cut o .
4:3 LETTERBOX
If the unit is connected to a conventional TV set, a wide-screen image will be displayed in its native aspect
ratio with black borders on the top and on the bottom.
9
www.PyleUSA.com