Broadcasting Transmission; Broadcasting Address; Monitor Address; Reset - Ebyte E31-433T17D User Manual

Chengdu Ebyte Electronic Technology Co.,Ltd.

5.2 Broadcasting transmission

5.3 Broadcasting address

 For example: Set the address of module A as 0xFFFF or 0x0000, and the channel as 0x04;
 When module A works as transmitter (same mode, transparent transmission), all the receivers with 0x04 channel can
receive the data, to realize the broadcast transmission.

5.4 Monitor address

 For example: Set the address of module A as 0xFFFF or 0x0000, and the channel as 0x04;
 When module A is the receiver, it can receive the data sent from all modules under channel 0x04, the purpose of
monitor is realized.

5.5 Reset

 When the module is powered, AUX outputs low level immediately, conducts hardware self-check and sets the
operating mode based on user's parameters. During the process, the AUX remains low level. After the process
completed, the AUX outputs high level and starts to work as per the operating mode combined by M1 and M0.
Therefore, users need to wait the AUX rising edge as the start of module's normal work.

5.6 AUX description

 AUX Pin can be used as indication for wireless send & receive buffer and self-check.
Copyright ©2012–2019，Chengdu Ebyte Electronic Technology Co.,Ltd.
E31-433T17D User Manual
7