Advertisement
Quick Links
Advertisement
Related Manuals for SuperCloset SuperNova
Summary of Contents for SuperCloset SuperNova
- Page 1 SUPERNOVA SMART GROW CABINET...
-
Page 2: Welcome To The Family
SuperNova. Please read through the entire instruction manual before you begin, including any and all instructions that come with the individual components. Lets take a look at the layout and components of your SuperCloset. CARBON AIR FILTERS GROW LIGHT... - Page 3 CARBON AIR FILTER KIND LED LIGHT POWER STRIP AIR PUMP WATER PUMP INTERNAL CIRCULATION FAN SUPERPONICS XL12 SOIL POTS SOIL POT TRAYS 1/4” AIR TUBE HOSE AIR STONES 3.75” & 2” NET CUPS LOTUS NUTRIENTS SAMPLES Ph TESTING KIT SHOT MEASURING GLASS GFCI THERMOMETER/ TDS METER...
- Page 4 Let’s start with unpacking the SuperCloset... Carefully unbox your SuperCloset and remove all contents from inside the cabinet. Unpack the contents of the cabinet, as well as any components packaged inside the cabinet reservoir. Reference your Quality Assurance Checklist and verify that you have all of the needed components for your system.
- Page 5 4. Locate the Power Strip (image c). Locate the two screws on the center rear of the cabinet. The power strip has holes on it that fit on these screws for mounting (image d). If you have any questions during the setup process, please call a SuperCloset representative at 1.877.476.9787...
- Page 6 (image d). Repeat steps 1-4 for the second Carbon Filter/Fan. 5. Run the power cords for the Carbon Filter Fans through the nearest Elbow to the back of the cabinet. If you have any questions during the setup process, please call a SuperCloset representative at 1.877.476.9787...
- Page 7 T5 to each side of your cabinet, via the magnetic backing, in the main growing chamber (image f). Run cords through the nearest Elbow opening. If you have any questions during the setup process, please call a SuperCloset representative at 1.877.476.9787...
- Page 8 5. Run the external probe to the outside of the cabinet, through the nearest Elbow. Make sure the probe is not touching any surface on the out side of the cabinet as this will provide false readings. If you have any questions during the setup process, please call a SuperCloset representative at 1.877.476.9787...
- Page 9 Total Germination Kit 1. If using the supplied germination kit, it will be placed in the Cloning Chamber next to the SuperCloner 50 (image f). If you have any questions during the setup process, please call a SuperCloset representative at 1.877.476.9787...
- Page 10 Air Pump and Air Stones running at all times when the system is in use. If you have any questions during the setup process, please call a SuperCloset representative at 1.877.476.9787...
- Page 11 9. Place the SuperPonics system and Air Pump inside the flower chamber of the cabinet. Run the Water Pump and Air Pump power cords through the lower opening in the back of the cabinet. OPEN CLOSED If you have any questions during the setup process, please call a SuperCloset representative at 1.877.476.9787...
-
Page 12: Final Assembly
T5 CLONE CHAMBER T5 SIDE LIGHTS KIND LED LIGHT WATER PUMP INTERNAL CIRCULATION FAN AIR PUMP AIR PUMP CARBON CARBON FILTER FAN #1 FILTER FAN #2 If you have any questions during the setup process, please call a SuperCloset representative at 1.877.476.9787... -
Page 13: Almost Done
7) Power Strip is off and plugged into the GFCI Protector. 6. After verifying all of the above, it’s time to turn on your SuperCloset. Turn the power strip switch to the ON position, and the system should spring to life before your very eyes! If you have any questions during the setup process, please call a SuperCloset representative at 1.877.476.9787...
Need help?
Do you have a question about the SuperNova and is the answer not in the manual?
Questions and answers