Download
Share
Print this page
Frigidaire GLTF2070DS0 Installation Instructions
  1. Manuals
  2. Brands
  3. Frigidaire Manuals
  4. Washer
  5. GLTF2070DS0
  6. Installation instructions
Frigidaire GLTF2070DS0 Installation Instructions

Frigidaire GLTF2070DS0 Installation Instructions

Full size tumble action washers
Hide thumbs Also See for GLTF2070DS0:
1
2
3
4
5

Advertisement

Quick Links

Download this manual See also: Operating Instructions, User Manual
Before beginning installation, carefully read these instructions. This will simplify the
installation and ensure the washer is installed correctly and safely. Leave these instructions
near the washer after installation for future reference.
NOTE: The electrical service to the washer must conform with local codes and ordinances
and the latest edition of the National Electrical Code, ANSI/NFPA 70.
For your safety the information in
this manual must be followed to minimize the
risk of fire or explosion or to prevent property
damage, personal injury or loss of life.
- Do not store or use gasoline or other
flammable vapors and liquid in the vicinity of
this or any other appliance.
- WHAT TO DO IF YOU SMELL GAS
· Do not try to light any appliance.
· Do not touch any electrical switch; do not
use any phone in your building.
· Clear the room, building or area of all
occupants.
· Immediately call your gas supplier from a
neighbor's phone. Follow the gas suppliers
instructions.
· If you cannot reach your gas supplier, call
the fire department.
Installation and service must be performed by
a qualified installer, service agency or the gas
supplier.
Printed in U.S.A.
Installation
Instructions
Full Size Tumble Action Washers
SUBJECT
Contents
PAGE
P/N 134305600 (0310)
2
2
2
2
2
3
4
4
5
5

Advertisement

loading

Related Manuals for Frigidaire GLTF2070DS0

Summary of Contents for Frigidaire GLTF2070DS0

  • Page 1: Table Of Contents

    Leave these instructions near the washer after installation for future reference. NOTE: The electrical service to the washer must conform with local codes and ordinances and the latest edition of the National Electrical Code, ANSI/NFPA 70.

  • Page 2: Pre-Installation Requirements

    Check with a licensed electrician if you are in doubt as to whether the appliance is properly grounded. 1. The washer MUST be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electrical shock by a path of least resistance for electrical current.

  • Page 3: Rough-In Dimensions

    ROUGH-IN DIMENSIONS 17 1/2 ( 44.5 ) (6.4) (61) (89.5) (44.5) (6.4) (61) (89.5)

  • Page 4: Location Of Your Washer

    UNPACKING 1. Cut the shipping carton along the dotted line along the base of the unit. 2. While in the carton carefully lay the washer on its back side. 3. Remove the styrofoam base. Carefully return the washer to an upright position and remove the carton.

  • Page 5: Installation

    NOTE: Do not use the dispenser drawer or door to lift washer. With the washer in its final position, place a level on top of the washer, no rocking of the washer should exist. Adjust the front leveling legs up or down to ensure the washer is resting solid.