Advertisement
Quick Links
Operating manual for Air Commando chronograph watch (models D45-S, BU, B, GS)
All manuals and user guides at all-guides.com
Thank you for choosing a timepiece from our Xezo for unite4:good collection.
The Xezo Air Commando Limited Edition 500 chronograph sports 2 crowns.
Crown (A) at 3 o'clock is used to adjust local time, day and date.
Crown (B) at 10 o'clock operates the inner rotating bezel.
Your watch is fitted with Swiss-made precision quartz movement.
To unlock the screw-down crown (A) turn it 4-5 times counter-clockwise.
Important note:
Remark:
You can synchronize the seconds hand with an official time signal (radio/ TV/Internet). When the crown (A)
is pulled out in Position "3" (two "clicks" out), the seconds hand is stopped. As soon as the time setting has
been synchronized, return the screw-down crown (A) to the locked position by pressing it against the case
and turning it clockwise. Screw-down crown (A) now should be screwed down tightly to Position "1".
Using the rotating uni-directional bezel
This feature enables you to track elapsed time.
1.
Turn the bezel counter-clockwise until the zero mark is at the minute hand.
Important note: This model has unidirectional rotating bezel; the bezel only turns counter-clockwise to assure
that if moved unintentionally, the time reading will err on the side of caution when measuring elapsed time.
2.
The position of the minute hand in relation to the zero mark on the bezel will indicate the total number of minutes
elapsed.
Using dual-directional inner rotating bezel as additional time zone or to track elapsed time for models: D45-S, BU, B
This feature enables you to set the additional time zone or to track elapsed time. Hold the watch face-up with the
numeral 6 pointing toward you. Then rotate the watch 180 degrees counterclockwise.
(Numeral 12 now points toward you.)
To set the additional time zone turn the Crown (B) clockwise or counterclockwise until the hour hand points to
the desired marker on the hour scale of the inner rotating bezel. To track elapsed time turn the inner bezel in
either direction until the triangle on it points to the hour hand.
Using dual-directional inner rotating bezel as additional time zone or to track elapsed time for Air Commando D45-GS model.
This feature enables you to set the additional time zone or to track elapsed time. Hold the watch face-up with the
numeral 6 pointing toward you and the calendar on your right.
Then rotate the watch 180 degrees counterclockwise. (Numeral 12 now points toward you.)
Hold the crown (B) with the thumb and index finger of your right hand. To unlock the inner bezel, turn the
crown (B) 4 or 5 times counterclockwise. To set the additional time zone turn the crown (B) clockwise or
counterclockwise until the hour hand points to the desired marker on the hour scale of the inner rotating bezel.
To track elapsed time turn the inner bezel in either direction until the triangle on it points to the hour hand.
Once you have set the inner bezel, return the screw-down crown (B) to the locked position by pressing it
against the case and turning it clockwise. The crown (B) should now be screwed down tightly.
Important Note:
In order to insure that your watch remains water-resistant, it is important that all push-buttons and
Crown (A) are always returned to the locked position by pressing each against the case while turning
it clockwise. For model D45-GS, Crown (B) also has to returned to the locked position.
Specifications:
Case and Bracelet - 316L Stainless Steel (leather band is optional)
Glass - Swiss-made flat Sapphire Crystal with anti-reflection
Movement - Swiss-made 13 jewels precision quartz chronograph. Long-life battery.
Approximately lasting 4.5 years after activation.
Case back - 316 L Stainless Steel
Description of the display and control buttons
Water-Resistance – 200M/660FT - 300M/990FT
Servicing your Xezo watch
Display elements
Control buttons
Although components in your watch have been manufactured from first-rate materials, certain parts are
Second hand
subject to natural wear and tear. It is vital that all parts
Minute hand
Description of the display and control buttons
Push-button A
are properly inspected and the battery replaced at
Weekday
MO
Hour hand
Crown at 3 o'clock
regular intervals to avoid any problems.
Second counter
Control buttons
Display elements
We therefore, recommend that you have your
Push-button B
Minute counter
23
Second hand
watch serviced about once every 4-5 years.
1
⁄
second counter
Minute hand
10
(hour counter after 30 minutes)
Contact us for after-sales service.
Push-button A
Description of the display and control buttons
Weekday
Date
MO
http://www.xezo.com
Description of the display and control buttons
Hour hand
01
Crown at 3 o'clock
Description of the display and control buttons
Second counter
Display elements
Control buttons
Push-button B
Minute counter
Description of the display and control buttons
23
Important Note:
Display elements
Control buttons
Second hand
1
In order to operate crown at 3 o'clock, you must
⁄
second counter
10
Second hand
Display elements
Control buttons
Minute hand
(hour counter after 30 minutes)
unscrew it by turning it counterclockwise 4-5 times.
D45-GS
In order to operate crown at 10 o'clock for model
, you must
Second hand
Push-button A
Minute hand
Display elements
Weekday
Date
Control buttons
unscrew it by turning it counterclockwise 3-4 times.
MO
Push-button A
01
Weekday
Minute hand
Hour hand
Second hand
Crown at 3 o'clock
MO
Push-button A
Setting the time
Weekday
Hour hand
Second counter
Minute hand
Crown at 3 o'clock
A
MO
Push-button B
Hour hand
Second counter
Push-button A
Minute counter
23
Crown at 3 o'clock
Important Note:
Weekday
*
P ull out the crown to position III
Push-button B
MO
In order to operate crown at 3 o'clock, you must
Second counter
MO
(the watch stops).
Minute counter
1
⁄
second counter
23
Hour hand
10
Crown at 3 o'clock
unscrew it by turning it counterclockwise 4-5 times.
Push-button B
(hour counter after 30 minutes)
In order to operate crown at 10 o'clock for model
D45-GS
, you must
1
Minute counter
⁄
second counter
23
Second counter
10
unscrew it by turning it counterclockwise 3-4 times.
I
II
III
Date
(hour counter after 30 minutes)
Push-button B
1
⁄
second counter
Turn the crown until you reach the correct
10
Minute counter
23
01
Date
(hour counter after 30 minutes)
23
time 8:45.
B
Setting the time
1
⁄
second counter
01
10
Date
A
(hour counter after 30 minutes)
01
A
* Push the crown back into position I.
*
P ull out the crown to position III
Important Note:
Date
MO
(the watch stops).
In order to operate crown at 3 o'clock, you must
Important Note:
01
unscrew it by turning it counterclockwise 4-5 times.
Please note
In order to operate crown at 3 o'clock, you must
MO
D45-GS
In order to operate crown at 10 o'clock for model
, you must
Important Note:
I
II
III
* In order to set the time to the exact second,
unscrew it by turning it counterclockwise 4-5 times.
unscrew it by turning it counterclockwise 3-4 times.
In order to operate crown at 3 o'clock, you must
D45-GS
Turn the crown until you reach the correct
must be pulled out when the second
In order to operate crown at 10 o'clock for model
, you must
23
I
II
III
time 8:45.
unscrew it by turning it counterclockwise 4-5 times.
Important Note:
unscrew it by turning it counterclockwise 3-4 times.
hand is in position «60».
B
D45-GS
In order to operate crown at 10 o'clock for model
, you must
Once the hour and minute hands have been
In order to operate crown at 3 o'clock, you must
Setting the time
unscrew it by turning it counterclockwise 3-4 times.
23
set,
must be pushed back into position I
unscrew it by turning it counterclockwise 4-5 times.
A
B
D45-GS
In order to operate crown at 10 o'clock for model
Setting the time
at the exact second.
, you must
02
* Push the crown back into position I.
A
A
unscrew it by turning it counterclockwise 3-4 times.
*
P ull out the crown to position III
Setting the time
MO
(the watch stops).
A
*
P ull out the crown to position III
Please note
MO
MO
(the watch stops).
Setting the time
* In order to set the time to the exact second,
*
P ull out the crown to position III
A
I
II
III
MO
(the watch stops).
must be pulled out when the second
Setting the date (quick mode)
Turn the crown until you reach the correct
A
I
II
III
hand is in position «60».
I
II
III
23
*
P ull out the crown to position III
time 8:45.
Once the hour and minute hands have been
Turn the crown until you reach the correct
MO
B
(the watch stops).
23
I
II
III
23
set,
time 8:45.
Pull out the crown to position II (the watch
must be pushed back into position I
B
Turn the crown until you reach the correct
MO
B
at the exact second.
continues to run).
02
23
time 8:45.
A
I
II
III
* Push the crown back into position I.
B
Turn the crown until you reach the correct
A
I
II
* Push the crown back into position I.
23
time 8:45.
Turn the crown until the correct date
B
Please note
1
MO
A
* Push the crown back into position I.
31
appears.
* In order to set the time to the exact second,
B
Setting the date (quick mode)
Please note
MO
must be pulled out when the second
A
* In order to set the time to the exact second,
* Push the crown back into position I.
A
I
II
III
hand is in position «60».
Please note
MO
must be pulled out when the second
Once the hour and minute hands have been
A
* In order to set the time to the exact second,
Pull out the crown to position II (the watch
Push the crown back into position I.
I
II
III
hand is in position «60».
23
set,
must be pushed back into position I
must be pulled out when the second
MO
Please note
continues to run).
MO
B
Once the hour and minute hands have been
at the exact second.
I
II
III
hand is in position «60».
02
23
* In order to set the time to the exact second,
set,
must be pushed back into position I
Please note
MO
B
Once the hour and minute hands have been
at the exact second.
must be pulled out when the second
02
I
II
23
The date can be changed during the date
set,
must be pushed back into position I
I
II
III
hand is in position «60».
B
changing phase between approx. 9:00 PM
Turn the crown until the correct date
1
at the exact second.
Once the hour and minute hands have been
02
31
appears.
I
II
and 12:00 PM; please note that the date must
23
set,
must be pushed back into position I
B
B
be set to the date of the following day as in
Setting the date (quick mode)
at the exact second.
02
1
this case the automatic date changing does
A
B
Setting the date (quick mode)
not occur at midnight.
03
Push the crown back into position I.
A
A
Pull out the crown to position II (the watch
Setting the date (quick mode)
MO
continues to run).
A
Pull out the crown to position II (the watch
Please note
MO
MO
continues to run).
Setting the date (quick mode)
The date can be changed during the date
Pull out the crown to position II (the watch
A
I
II
MO
Setting the date, weekday and
changing phase between approx. 9:00 PM
continues to run).
Turn the crown until the correct date
1
I
II
A
I
II
and 12:00 PM; please note that the date must
31
time
Pull out the crown to position II (the watch
appears.
be set to the date of the following day as in
Turn the crown until the correct date
B
1
MO
continues to run).
1
I
II
31
this case the automatic date changing does
appears.
Turn the crown until the correct date
MO
B
B
1
Example:
not occur at midnight.
03
31
appears.
I
II
Push the crown back into position I.
A
– Date / time on the watch:
/ 01:25 /
17
MO
B
Turn the crown until the correct date
1
– Present date / time:
23
/ 20:35 /
TH
A
I
II
III
Push the crown back into position I.
31
appears.
B
Please note
MO
Pull out the crown to position III
A
Push the crown back into position I.
17
The date can be changed during the date
Setting the date, weekday and
(the watch stops).
Please note
MO
B
changing phase between approx. 9:00 PM
A
The date can be changed during the date
Push the crown back into position I.
A
I
II
time
and 12:00 PM; please note that the date must
Please note
Turn the crown until yesterday' s weekday
MO
changing phase between approx. 9:00 PM
be set to the date of the following day as in
A
The date can be changed during the date
WE
appears.
I
II
and 12:00 PM; please note that the date must
1
this case the automatic date changing does
changing phase between approx. 9:00 PM
MO
Please note
B
Example:
be set to the date of the following day as in
MO
not occur at midnight.
I
II
and 12:00 PM; please note that the date must
Push the crown to position II.
03
1
The date can be changed during the date
this case the automatic date changing does
– Date / time on the watch:
17
/ 01:25 /
MO
WE
B
be set to the date of the following day as in
– Present date / time:
not occur at midnight.
changing phase between approx. 9:00 PM
/ 20:35 /
23
TH
03
I
II
III
1
this case the automatic date changing does
Turn the crown until yesterday' s date
I
II
and 12:00 PM; please note that the date must
B
not occur at midnight.
appears
be set to the date of the following day as in
22
.
03
Pull out the crown to position III
17
I
II
III
1
this case the automatic date changing does
(the watch stops).
B
B
Setting the date, weekday and
not occur at midnight.
03
22
A
B
time
Turn the crown until yesterday' s weekday
Setting the date, weekday and
A
appears.
WE
A
time
Setting the date, weekday and
MO
Example:
A
Push the crown to position II.
time
– Date / time on the watch:
/ 01:25 /
17
MO
MO
WE
Setting the date, weekday and
Example:
A
– Present date / time:
* Pull out the crown to position III
/ 20:35 /
Turn the crown until yesterday' s date
23
TH
A
I
II
III
– Date / time on the watch:
/ 01:25 /
65,5% = 40mm Druchmesser
time
17
MO
MO
(the watch stops).
Example:
appears
22
.
– Present date / time:
23
/ 20:35 /
TH
I
II
III
Pull out the crown to position III
I
II
III
17
– Date / time on the watch:
/ 01:25 /
17
MO
T H
(the watch stops).
Turn the crown until the correct date
MO
23
B
– Present date / time:
23
/ 20:35 /
TH
Example:
Pull out the crown to position III
22
I
II
III
17
and weekday
TH
appears.
– Date / time on the watch:
/ 01:25 /
B
(the watch stops).
17
MO
Turn the crown until yesterday' s weekday
B
Pull out the crown to position III
– Present date / time:
/ 20:35 /
17
I
II
III
23
TH
A
I
II
III
** Continue to turn the crown,until the
appears.
WE
(the watch stops).
Turn the crown until yesterday' s weekday
B
correct time 8:35 PM appears.
Pull out the crown to position III
23
A
WE
appears.
17
Push the crown to position II.
B
Turn the crown until yesterday' s weekday
(the watch stops).
WE
B
Push the crown back into position I.
A
A
* Pull out the crown to position III
WE
appears.
Push the crown to position II.
Turn the crown until yesterday' s date
65,5% = 40mm Druchmesser
(the watch stops).
Turn the crown until yesterday' s weekday
WE
appears
22
.
A
Push the crown to position II.
A
Turn the crown until yesterday' s date
appears.
I
II
III
WE
WE
T H
Turn the crown until the correct date
23
appears
22
.
Turn the crown until yesterday' s date
and weekday
appears.
I
II
III
Push the crown to position II.
TH
22
T H
appears
WE
B
22
.
I
II
III
I
II
III
22
** Continue to turn the crown,until the
Turn the crown until yesterday' s date
Please note
B
correct time 8:35 PM appears.
appears
22
.
23
* To set your watch to the exact second,
22
I
II
III
I
II
III
B
B
please refer to the chapter entitled
Push the crown back into position I.
«setting the time».
23
A
* Pull out the crown to position III
22
B
** Please observe the AM/PM clock rh
65,5% = 40mm Druchmesser
ythm.
B
(the watch stops).
A
A
* Pull out the crown to position III
65,5% = 40mm Druchmesser
(the watch stops).
Turn the crown until the correct date
04
T H
23
A
* Pull out the crown to position III
and weekday
appears.
65,5% = 40mm Druchmesser
TH
(the watch stops).
T H
T H
Turn the crown until the correct date
23
A
* Pull out the crown to position III
I
II
III
and weekday
TH
appears.
** Continue to turn the crown,until the
Please note
T H
Turn the crown until the correct date
65,5% = 40mm Druchmesser
(the watch stops).
23
correct time 8:35 PM appears.
I
II
III
* To set your watch to the exact second,
I
II
III
and weekday
TH
appears.
23
** Continue to turn the crown,until the
please refer to the chapter entitled
B
Turn the crown until the correct date
T H
correct time 8:35 PM appears.
23
Push the crown back into position I.
23
I
II
III
«setting the time».
23
** Continue to turn the crown,until the
and weekday
appears.
TH
B
B
** Please observe the AM/PM clock rh
ythm.
correct time 8:35 PM appears.
Push the crown back into position I.
23
A
I
II
III
** Continue to turn the crown,until the
B
04
Push the crown back into position I.
correct time 8:35 PM appears.
A
23
B
T H
Push the crown back into position I.
A
T H
Please note
A
* To set your watch to the exact second,
I
II
III
T H
Please note
please refer to the chapter entitled
* To set your watch to the exact second,
I
II
III
23
«setting the time».
Please note
please refer to the chapter entitled
T H
B
** Please observe the AM/PM clock rh
ythm.
* To set your watch to the exact second,
I
II
III
«setting the time».
23
B
please refer to the chapter entitled
Please note
** Please observe the AM/PM clock rh
ythm.
04
23
* To set your watch to the exact second,
«setting the time».
I
II
III
B
** Please observe the AM/PM clock rh
ythm.
please refer to the chapter entitled
04
23
«setting the time».
B
** Please observe the AM/PM clock rh
ythm.
04
Crown B
Crown A
Chronograph: Basic function
A
(Start / Stop / Reset)
Example:
MO
Start: Press push-button A.
Stop:
to stop the timing, press
push-button A once more and read
23
the chronograph counters:
B
Chronograph: Basic function
4 min / 38 sek /
7
⁄
sec
A
10
(Start / Stop / Reset)
A
Zero positioning:
Example:
MO
Press push-button B.
Start: Press push-button A.
(The chronograph hands will be reset to
MO
their zero positions.)
Stop:
to stop the timing, press
Important Note:
push-button A once more and read
23
In order to operate a push button A or B,
the chronograph counters:
B
you must unscrew it by turning it
Chronograph: Basic function
4 min / 38 sek /
7
⁄
sec
10
23
A
counterclockwise 4-5 times.
B
Chronograph: Basic function
(Start / Stop / Reset)
05
A
A
Zero positioning:
(Start / Stop / Reset)
Chronograph: Basic function
MO
Example:
A
Press push-button B.
Start: Press push-button A.
(The chronograph hands will be reset to
(Start / Stop / Reset)
MO
Example:
MO
Chronograph: Basic function
their zero positions.)
A
Start: Press push-button A.
Chronograph:
Stop:
to stop the timing, press
Important Note:
Example:
MO
(Start / Stop / Reset)
A
push-button A once more and read
Start: Press push-button A.
In order to operate a push button A or B,
Accumulated timing
Stop:
to stop the timing, press
23
the chronograph counters:
B
MO
you must unscrew it by turning it
Example:
push-button A once more and read
23
4 min / 38 sek /
7
⁄
sec
Example:
to stop the timing, press
10
23
counterclockwise 4-5 times.
Start: Press push-button A.
Stop:
the chronograph counters:
B
MO
B
push-button A once more and read
05
4 min / 38 sek /
Start:
(start timing)
7
⁄
sec
10
23
A
the chronograph counters:
Stop:
to stop the timing, press
B
Zero positioning:
Stop:
(e.g. 15 min 5 sec following
)
7
push-button A once more and read
4 min / 38 sek /
⁄
sec
10
A
Press push-button B.
23
the chronograph counters:
Restart: (timing is resumed)
Zero positioning:
B
(The chronograph hands will be reset to
MO
23
A
Press push-button B.
4 min / 38 sek /
7
⁄
sec
10
their zero positions.)
*
Stop:
(e.g. 5 min 12 sec following
)
B
Chronograph:
Zero positioning:
(The chronograph hands will be reset to
MO
Important Note:
A
Press push-button B.
=
20 min 17 sec
their zero positions.)
A
Accumulated timing
In order to operate a push button A or B,
(The chronograph hands will be reset to
MO
Zero positioning:
(The accumulated measured time is shown)
Important Note:
A
you must unscrew it by turning it
their zero positions.)
Press push-button B.
Example:
23
In order to operate a push button A or B,
MO
counterclockwise 4-5 times.
Reset:
Important Note:
(The chronograph hands will be reset to
B
Start:
(start timing)
MO
you must unscrew it by turning it
05
The chronograph hands are returned to
23
In order to operate a push button A or B,
their zero positions.)
counterclockwise 4-5 times.
MO
B
Stop:
their zero positions.
(e.g. 15 min 5 sec following
)
you must unscrew it by turning it
Important Note:
05
23
counterclockwise 4-5 times.
B
In order to operate a push button A or B,
Please note
Restart: (timing is resumed)
05
you must unscrew it by turning it
* Following
, the accumulation of the
23
23
B
*
Stop:
(e.g. 5 min 12 sec following
)
counterclockwise 4-5 times.
timing can be continued by pressing
B
Chronograph:
23
=
20 min 17 sec
05
A
push-button A
Accumulated timing
B
Chronograph:
(Restart / Stop, Restart / Stop, ...).
(The accumulated measured time is shown)
06
A
A
Accumulated timing
Example:
Chronograph:
Reset:
MO
A
Start:
(start timing)
The chronograph hands are returned to
Accumulated timing
Example:
MO
their zero positions.
MO
Chronograph:
Stop:
Start:
(e.g. 15 min 5 sec following
(start timing)
)
A
Example:
Chronograph:
Accumulated timing
Please note
MO
Stop:
Restart: (timing is resumed)
(e.g. 15 min 5 sec following
)
A
Start:
(start timing)
* Following
, the accumulation of the
Intermediate or interval timing
23
Example:
timing can be continued by pressing
B
*
Restart: (timing is resumed)
Stop:
Stop:
(e.g. 15 min 5 sec following
(e.g. 5 min 12 sec following
)
)
MO
23
push-button A
Start:
(start timing)
23
Example:
=
20 min 17 sec
B
*
Stop:
(e.g. 5 min 12 sec following
)
MO
B
(Restart / Stop, Restart / Stop, ...).
Restart: (timing is resumed)
06
Start: (start timing)
(The accumulated measured time is shown)
Stop:
(e.g. 15 min 5 sec following
)
23
=
20 min 17 sec
A
*
Stop:
(e.g. 5 min 12 sec following
)
B
Display interval:
Restart: (timing is resumed)
(The accumulated measured time is shown)
Reset:
e.g.
20 minutes 17 seconds
=
20 min 17 sec
(timing
A
23
The chronograph hands are returned to
continues in the background)
B
*
Stop:
Reset:
(e.g. 5 min 12 sec following
(The accumulated measured time is shown)
)
MO
their zero positions.
23
A
*
Making up the measured time:
The chronograph hands are returned to
=
20 min 17 sec
B
Chronograph:
MO
Reset:
Please note
(The chronograph hands are quickly
their zero positions.
(The accumulated measured time is shown)
A
A
Intermediate or interval timing
The chronograph hands are returned to
* Following
advanced to the ongoing measured time.)
, the accumulation of the
MO
Please note
timing can be continued by pressing
their zero positions.
Reset:
A
Stop: (Final time is displayed)
* Following
, the accumulation of the
23
Example:
push-button A
The chronograph hands are returned to
MO
Please note
Reset:
timing can be continued by pressing
MO
B
Start: (start timing)
(Restart / Stop, Restart / Stop, ...).
their zero positions.
* Following
, the accumulation of the
06
23
The chronograph hands are returned to
push-button A
MO
Display interval:
timing can be continued by pressing
B
Please note
(Restart / Stop, Restart / Stop, ...).
their zero position
06
23
e.g.
20 minutes 17 seconds
(timing
push-button A
* Following
, the accumulation of the
Please note
continues in the background)
B
timing can be continued by pressing
(Restart / Stop, Restart / Stop, ...).
06
23
* Following
, further intervals or inter-
23
*
Making up the measured time:
push-button A
B
mediates can be displayed by pressing
B
Chronograph:
(The chronograph hands are quickly
(Restart / Stop, Restart / Stop, ...).
23
06
A
push-button B (display interval / make up
advanced to the ongoing measured time.)
Intermediate or interval timing
B
Chronograph:
measured time, ...).
07
Stop: (Final time is displayed)
A
A
Intermediate or interval timing
Chronograph:
Example:
Reset:
MO
A
Start: (start timing)
The chronograph hands are returned to
Intermediate or interval timing
Example:
MO
their zero position
MO
Chronograph:
Display interval:
Start: (start timing)
A
Example:
e.g.
20 minutes 17 seconds
(timing
Intermediate or interval timing
Adjusting the chronograph
Please note
MO
Display interval:
continues in the background)
A
Start: (start timing)
* Following
, further intervals or inter-
e.g.
20 minutes 17 seconds
(timing
hands to zero position
23
*
Example:
Making up the measured time:
mediates can be displayed by pressing
Display interval:
B
continues in the background)
MO
23
(The chronograph hands are quickly
Start: (start timing)
e.g.
20 minutes 17 seconds
(timing
23
Example:
push-button B (display interval / make up
*
Making up the measured time:
B
advanced to the ongoing measured time.)
MO
B
measured time, ...).
continues in the background)
One or several chronograph hands are not
Display interval:
(The chronograph hands are quickly
07
23
A
Stop: (Final time is displayed)
*
in their correct zero positions and have to be
e.g.
Making up the measured time:
20 minutes 17 seconds
(timing
advanced to the ongoing measured time.)
B
adjusted (e.g. following a battery change).
(The chronograph hands are quickly
continues in the background)
Reset:
I
II
III
A
Stop: (Final time is displayed)
23
The chronograph hands are returned to
advanced to the ongoing measured time.)
*
Making up the measured time:
B
Reset:
MO
their zero position
Pull out the crown to position III
A
Stop: (Final time is displayed)
(The chronograph hands are quickly
23
The chronograph hands are returned to
(all chronograph hands are in their correct
B
Adjusting the chronograph
advanced to the ongoing measured time.)
MO
Reset:
Please note
their zero position
A
or incorrect zero position).
A
Stop: (Final time is displayed)
The chronograph hands are returned to
hands to zero position
* Following
, further intervals or inter-
MO
Please note
their zero position
mediates can be displayed by pressing
Reset:
A
23
Example:
* Following
, further intervals or inter-
push-button B (display interval / make up
The chronograph hands are returned to
Please note
Keep push-buttons A and B depressed
MO
mediates can be displayed by pressing
MO
B
65,5% = 40mm Druchmesser
One or several chronograph hands are not
measured time, ...).
their zero position
07
23
* Following
simultaneously for at least 2 seconds
, further intervals or inter-
in their correct zero positions and have to be
push-button B (display interval / make up
mediates can be displayed by pressing
(the second counter hand rotates by
MO
B
Please note
adjusted (e.g. following a battery change).
measured time, ...).
07
23
I
II
III
push-button B (display interval / make up
360° corrective mode is activated).
65,5% = 40mm Druchmesser
* Following
, further intervals or inter-
B
measured time, ...).
65,5% = 40mm Druchmesser
mediates can be displayed by pressing
Pull out the crown to position III
07
23
III
23
push-button B (display interval / make up
(all chronograph hands are in their correct
B
B
Adjusting the chronograph
measured time, ...).
65,5% = 40mm Druchmesser
or incorrect zero position).
07
23
A
hands to zero position
B
Adjusting the chronograph
A
A
hands to zero position
65,5% = 40mm Druchmesser
Example:
Adjusting the chronograph
Keep push-buttons A and B depressed
MO
65,5% = 40mm Druchmesser
A
One or several chronograph hands are not
65,5% = 40mm Druchmesser
simultaneously for at least 2 seconds
hands to zero position
Example:
in their correct zero positions and have to be
MO
(the second counter hand rotates by
MO
Adjusting the chronograph
One or several chronograph hands are not
A
Adjusting the second counter hand
adjusted (e.g. following a battery change).
A
Example:
360° corrective mode is activated).
65,5% = 40mm Druchmesser
I
II
III
in their correct zero positions and have to be
hands to zero position
MO
Single step
A
1 x short
65,5% = 40mm Druchmesser
One or several chronograph hands are not
adjusted (e.g. following a battery change).
III
Pull out the crown to position III
A
I
II
III
Continuous
long
23
in their correct zero positions and have to be
Example:
III
B
(all chronograph hands are in their correct
MO
65,5% = 40mm Druchmesser
III
adjusted (e.g. following a battery change).
One or several chronograph hands are not
65,5% = 40mm Druchmesser
Pull out the crown to position III
23
III
I
II
III
or incorrect zero position).
23
Adjusting the next hand B
65,5% = 40mm Druchmesser
B
in their correct zero positions and have to be
(all chronograph hands are in their correct
B
B
Pull out the crown to position III
III
adjusted (e.g. following a battery change).
or incorrect zero position).
23
A
I
II
III
Adjusting the
1
⁄
second counter hand (position 6h)
A
10
III
65,5% = 40mm Druchmesser
B
(all chronograph hands are in their correct
Keep push-buttons A and B depressed
Single step
A
1 x short
65,5% = 40mm Druchmesser
or incorrect zero position).
65,5% = 40mm Druchmesser
A
Pull out the crown to position III
23
simultaneously for at least 2 seconds
A
Continuous
long
B
(all chronograph hands are in their correct
Keep push-buttons A and B depressed
III
MO
65,5% = 40mm Druchmesser
(the second counter hand rotates by
A
A
Adjusting the second counter hand
or incorrect zero position).
III
simultaneously for at least 2 seconds
360° corrective mode is activated).
III
Adjusting the next hand B
65,5% = 40mm Druchmesser
Keep push-buttons A and B depressed
A
Single step
1 x short
MO
B
65,5% = 40mm Druchmesser
(the second counter hand rotates by
65,5% = 40mm Druchmesser
Continuous
simultaneously for at least 2 seconds
A
III
long
A
360° corrective mode is activated).
65,5% = 40mm Druchmesser
III
III
Adjusting the minute counter hand (position 9h)
MO
65,5% = 40mm Druchmesser
Keep push-buttons A and B depressed
(the second counter hand rotates by
III
III
65,5% = 40mm Druchmesser
A
65,5% = 40mm Druchmesser
III
A
65,5% = 40mm Druchmesser
III
Single step
Adjusting the next hand B
360° corrective mode is activated).
1 x short
65,5% = 40mm Druchmesser
65,5% = 40mm Druchmesser
B
simultaneously for at least 2 seconds
23
A
B
Continuous
long
MO
65,5% = 40mm Druchmesser
(the second counter hand rotates by
III
65,5% = 40mm Druchmesser
III
Adjusting the
1
⁄
second counter hand (position 6h)
23
360° corrective mode is activated).
A
10
III
65,5% = 40mm Druchmesser
B
65,5% = 40mm Druchmesser
A
Single step
1 x short
65,5% = 40mm Druchmesser
III
65,5% = 40mm Druchmesser
23
65,5% = 40mm Druchmesser
III
Continuous
A
III
long
B
III
65,5% = 40mm Druchmesser
Returning the crown to position I
III
65,5% = 40mm Druchmesser
A
III
65,5% = 40mm Druchmesser
Adjusting the second counter hand
23
Adjusting the next hand B
III
65,5% = 40mm Druchmesser
B
Termination of the chronograph hands
I
B
II
III
Single step
A
1 x short
65,5% = 40mm Druchmesser
A
Adjusting the second counter hand
III
adjustment (can be carried out at any time).
A
Continuous
long
Adjusting the minute counter hand (position 9h)
III
III
65,5% = 40mm Druchmesser
Single step
A
1 x short
08
A
65,5% = 40mm Druchmesser
III
A
Adjusting the second counter hand
Single step
A
1 x short
65,5% = 40mm Druchmesser
A
III
Continuous
long
Adjusting the next hand B
65,5% = 40mm Druchmesser
B
III
Single step
Continuous
A
A
long
1 x short
65,5% = 40mm Druchmesser
III
A
III
A
III
Continuous
Adjusting the second counter hand
long
Adjusting the next hand B
65,5% = 40mm Druchmesser
B
Adjusting the
1
⁄
second counter hand (position 6h)
III
A
10
Important Note:
III
65,5% = 40mm Druchmesser
III
Single step
A
1 x short
III
A
III
III
Single step
1 x short
In order to operate crown at 3 o'clock, you must
Adjusting the next hand B
65,5% = 40mm Druchmesser
B
Continuous
Adjusting the
1
⁄
A
second counter hand (position 6h)
III
long
A
10
III
Continuous
A
long
III
unscrew it by turning it counterclockwise 4-5 times.
III
65,5% = 40mm Druchmesser
III
Returning the crown to position I
Single step
A
III
III
1 x short
In order to insure that your watch remains water-resistant,
III
Adjusting the
1
⁄
second counter hand (position 6h)
A
Adjusting the next hand B
10
A
III
65,5% = 40mm Druchmesser
B
III
Continuous
long
Adjusting the next hand B
it is important that all push-buttons and the crown at
III
III
Termination of the chronograph hands
III
I
II
Single step
A
1 x short
B
III
3 o'clock are always returned to the locked position by
adjustment (can be carried out at any time).
III
A
III
Adjusting the
Continuous
1
⁄
second counter hand (position 6h)
long
A
III
Adjusting the next hand B
10
III
III
pressing each against the case while turning it clockwise.
Adjusting the minute counter hand (position 9h)
08
III
B
A
A
Single step
1 x short
For model D45-GS it is important that crown at 10 o'clock is
III
III
Single step
A
1 x short
III
Adjusting the next hand B
Adjusting the minute counter hand (position 9h)
Continuous
A
long
always returned to the locked position by pressing it
A
III
III
B
Continuous
long
A
A
III
against the case while screwing down the crown.
Single step
1 x short
III
Adjusting the minute counter hand (position 9h)
Important Note:
Adjusting the next hand B
III
A
III
Continuous
long
A
B
A
III
Single step
1 x short
In order to operate crown at 3 o'clock, you must
III
A
III
unscrew it by turning it counterclockwise 4-5 times.
Continuous
Adjusting the minute counter hand (position 9h)
long
III
A
III
In order to insure that your watch remains water-resistant,
Returning the crown to position I
III
Single step
A
1 x short
III
it is important that all push-buttons and the crown at
A
Termination of the chronograph hands
Continuous
long
I
II
III
III
Returning the crown to position I
III
3 o'clock are always returned to the locked position by
adjustment (can be carried out at any time).
III
pressing each against the case while turning it clockwise.
Termination of the chronograph hands
I
II
III
Returning the crown to position I
III
08
III
For model D45-GS it is important that crown at 10 o'clock is
adjustment (can be carried out at any time).
III
always returned to the locked position by pressing it
Termination of the chronograph hands
I
II
III
08
against the case while screwing down the crown.
Returning the crown to position I
III
adjustment (can be carried out at any time).
Important Note:
Termination of the chronograph hands
08
I
II
III
06 / 2014
In order to operate crown at 3 o'clock, you must
adjustment (can be carried out at any time).
Important Note:
unscrew it by turning it counterclockwise 4-5 times.
08
Battery type: 395 (diameter 9.5 mm x 2.6 mm / SR 927 SW)
In order to operate crown at 3 o'clock, you must
In order to insure that your watch remains water-resistant,
Important Note:
unscrew it by turning it counterclockwise 4-5 times.
Accuracy: +20 / -10 seconds per month
it is important that all push-buttons and the crown at
In order to operate crown at 3 o'clock, you must
In order to insure that your watch remains water-resistant,
3 o'clock are always returned to the locked position by
unscrew it by turning it counterclockwise 4-5 times.
it is important that all push-buttons and the crown at
Important Note:
pressing each against the case while turning it clockwise.
3 o'clock are always returned to the locked position by
In order to insure that your watch remains water-resistant,
In order to operate crown at 3 o'clock, you must
For model D45-GS it is important that crown at 10 o'clock is
it is important that all push-buttons and the crown at
pressing each against the case while turning it clockwise.
unscrew it by turning it counterclockwise 4-5 times.
always returned to the locked position by pressing it
Advertisement
Related Manuals for Xezo Air Commando D45-B
Summary of Contents for Xezo Air Commando D45-B
- Page 1 Operating manual for Air Commando chronograph watch (models D45-S, BU, B, GS) All manuals and user guides at all-guides.com Thank you for choosing a timepiece from our Xezo for unite4:good collection. Crown B The Xezo Air Commando Limited Edition 500 chronograph sports 2 crowns.
- Page 2 All manuals and user guides at all-guides.com...