ITS Telecom Meeting Owl Pro Quick Start

If you are in a room with an installed instructor's computer, the Meeting Owl Pro already is
connected and ready for use. To begin, turn on the system and log in to the computer

Wake System

Tap on the screen
and then tap on
Touch to begin.
If you are using your own laptop, you'll need to connect the Owl to it by plugging the Owl's USB
cable into a USB port on your laptop. Also, be sure that the Owl's power supply is plugged into an
AC outlet. (Turn the Owl over to see its power and USB ports, located on its base.)
Laptop (connect
via USB)
When the Meeting Owl Pro is awakened by the system activation, its "eyes" will light up and it will
produce a hooting sound. The camera, which has a 360-degree field of view, is located at the top
of the unit. Buttons located toward the base can be used to mute the Owl's mics; when the mics
are muted, a red indicator lights above the buttons. Speaker volume buttons are also located
close to the base of the unit.
If using a room computer, Turn system off when finished. Tap OFF in the upper right corner of
the screen, then tap Yes to confirm that you would like to turn off the system.
QUICK START
The Meeting Owl Pro conference camera
(turn over for use with Zoom)
Camera
Speaker
Volume
Mic mute
button
Mic mute
indicator
light
:

Turn System On,

select PC,
and log in.
Plug power into
wall outlet