Settings
NOTE:
Access to the Internet and a wireless router required. As an added
•
convenience, T-Mobile has shipped certain smartphones with Wi-Fi
enabled as a default setting. Leaving Wi-Fi enabled when not connected
to a Wi-Fi network may affect battery charge. Qualifying data plan
required.
This device supports WEP, WPA/WPA2-PSK and 802.1x EAP. (Some
•
EAP methods are not supported.) If your Wi-Fi service provider or network
administrator sets encryption for network security, enter the key in the pop-up
window. If encryption is not set, this pop-up window will not be shown. You can
obtain the key from your Wi-Fi service provider or network administrator.
Bluetooth
Bluetooth is a short-range communications technology that allows you to
connect wirelessly to a number of Bluetooth devices, such as headsets and
hands-free car kits, and Bluetooth-enabled handhelds, computers, printers,
and wireless devices. The Bluetooth communication range is usually up to
approximately 30 feet.
Turn on Bluetooth
From the Home screen, tap
Bluetooth switch
To make your phone visible to other devices
1
From the Home screen, tap
Bluetooth.
2
Make sure Bluetooth is turned on.
3
Tap the checkbox next to the device name. Visibility is set to 2 minutes by
default.
NOTE: To change the visibility time length, tap
Choose from 2 min, 5 min, 1h or Never time out.
84
> Settings > Networks tab, then tap the
>
to turn on the Bluetooth functionality.
>
> Settings > Networks tab >
> Visibility timeout.