Remington MICRO FLEX R405 Use And Care Manual page 7

■ To dry, wipe the surface of the shaver with a dry towel. Do not use a hair dryer
or heater to dry the shaver.
■ Ensure that the main body of the shaver remains dry at all times.
I
M
Q
Daily:
1. Press the hairpocket release button to open hairpocket assembly. (Diagram I)
2. Tap out excess hair shavings. (Diagram J)
3. Close hairpocket assembly. (Diagram K)
Weekly:
1. Perform the daily cleaning steps 1 and 2.
2. Remove the cover from the hair pocket assembly. (Diagram L) Place the body of
the shaver aside to ensure that it will not get wet.
3. Release the inner cutter carrier by rotating the locking arms counter-clockwise.
(Diagram M)
4. Remove the inner cutter carrier away from the cutters. (Diagram N)
5. Remove the cutters. (Diagram O)
6. Thoroughly brush any hair off of the inner and outer cutters. (Diagram P)
7. Replace the inner cutters. (Diagram Q)
J
N
R
K
O
L
P
7