Menu functions
Retrieve option: determine whether or not the
phone retrieves headers only or the entire e-mail.
Delete option: determine whether e-mails are
deleted immediately or the next time you connect
to the server.
Reject if over: determine the maximum size for
incoming e-mails. Your phone will reject e-mails
that exceed the specified size.
Leave a copy of messages on the server: leave
copies of e-mails after retrieving.
•
Email account: set up an e-mail account and
select an account to be used.
Current account: select an account.
Account settings: configure up to five e-mail
accounts using different e-mail servers. The
following options are available for each account:
•
In use: activate the current e-mail account.
•
Account name: enter a name for the currently
selected account.
•
User name: enter a user name.
•
Email address: enter your e-mail address.
64
•
Reply address: enter an e-mail address to
which you want recipients to send reply
messages.
•
User ID: enter your e-mail ID.
•
Password: enter your e-mail password.
•
SMTP server: enter the IP address or domain
name of the outgoing e-mail server.
•
SMTP port: enter the SMTP port number.
•
Protocol type: select the protocol for the
incoming e-mail server. The remaining options
depend on the protocol type setting.
The following options are available when the
protocol type is POP3:
•
POP3 server: enter the IP address or domain
name of the server that receives your e-mail.
•
POP3 port: enter the POP3 port number.
•
APOP login: connect to the server by using
the APOP login scheme when this option is
selected.
These options are available when the protocol type
is IMAP4: